Products

Matching Product Technologies (2)

Adhesives & Sealants

Ready-to-Use Products

Adhesives & Sealants

Ready-to-Use Products

32 Products

TDSWith TDS

H.B. Fuller EV Protect 5008EXP

RTU Product Type:2K (2 component) Adhesive, Encapsulant
Application Area:Electric Vehicle (EV), Battery Cells, Batteries
Chemical Family:Polyurethanes (PU)
Features:Non-Outgassing, Vibration Resistance, Good Volume Expansion, Fast Cure, Room Temperature Curing, High Impact Resistance, Light Weight, Self-Leveling, High Fire Retardancy, Low Viscosity, Reduces Thermal Propagation, Rapid Cycle Time, Good Processability, High Insulation Properties

H.B. Fuller EV Protect 5008EXP is the next generation of our lightweight, fire retardant, protective encapsulant. It offers battery designers the ability to integrate high- level structural performance characteristics into their battery system which is ideal for cell to pack applications.

H.B. Fuller EV Protect 4006 SFR

Foam Type:2K System
Chemical Family:Polyurethanes (PU)
End Uses:Battery Cell Potting, Battery Module Encapsulation
Physical Form:Liquid

H.B. Fuller EV Protect 4006 SFR is a liquid-applied, two-component flame-retardant, low-density polyurethane foam material engineered for potting and encapsulating battery cells in electric vehicle (EV) battery modules. It allows engineers to increase the power density of their modules while enhancing safety and protection from thermal propagation. Its ultra-lightweight nature minimizes weight impact on battery modules. Additionally, it offers noise, vibration, and harshness benefits to the battery system by unitizing the battery module and absorbing external environmental impacts.

H.B. Fuller EV Bond 343

RTU Product Type:Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Nylon, Metal, Acrylonitrile Butadiene Styrene (ABS), Ceramic, Elastomers & Rubbers, Natural Rubber, Polycarbonate (PC), Plastics
Chemical Family:Polyurethanes (PU)
Features:Non-Sagging, Good Sagging Resistance, Good Processability, Easier Processing, Semi-flexible, High Reliability, Good Bonding Strength, Ease Of Use, Improved Adhesion, Medium Hardness, Highly Flexible, Resilient, Excellent Substrate Adhesion

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

H.B. Fuller EV Bond 300

RTU Product Type:Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Management System (BMS), Battery Casing
Compatible Substrates & Surfaces:Composites, Plastics, Metal
Chemical Family:Polyurethanes (PU)
Features:CTE Absorption, Thixotropic, Shock Absorbent, Room Temperature Curing, High Flexibility, Good Impact Strength, High Impact Resistance, Low Temperature Performance, High Elongation, Vibration Damping, Good Shrinkage Resistance

H.B. Fuller EV Bond 300 is a structural adhesive, designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

H.B. Fuller 2533W

Chemical Family:Silicones
RTU Product Type:2K (2 component) Adhesive, Thermal Adhesive
Application Area:Encapsulant, Batteries
Features:Good Thermal Conductivity

H.B. Fuller 2533W is a thermally conductive 2-part silicone gel that offers specific features and benefits. One notable advantage is its capability to provide thermal runaway and propagation protection for batteries. This is crucial for ensuring the safety and reliability of battery systems, particularly in applications such as electric vehicle (EV) encapsulation and protection. H.B. Fuller 2533W is specifically formulated to offer thermal management and protection properties in demanding battery applications.

H.B. Fuller EV Therm 288

Application Area:Electric Vehicle (EV), Electric Vehicle (EV) Batteries, Battery Packs, Batteries
Compatible Substrates & Surfaces:Metal, Galvanized Steel, Aluminum Alloys
Features:Water Resistant, Corrosion Resistant, Easier Processing, Electrical Insulation Properties, Fast Curing, Low Bond Strength, Good Thermal Conductivity, Impact Resistance
Color (Properties):Grey

H.B. Fuller EV Therm 288 is a silicone-free gap filler, formulated exclusively for EV battery environments. This thermal interface material cures at room temperature or is accelerated with heat and provides excellent thermal conductivity, electrical insulation, water resistance, corrosion resistance, and impact resistance properties.

H.B. Fuller EV Bond 705

Application Method:Extrusion, Spray, Slot-Die, Roller, Bead
Compatible Substrates & Surfaces:Film, Nylon, Metal, Polyethylene Terephthalate (PET), Glass
Features:Light Weight, Excellent Multi-Substrate Adhesion, Good Adhesion, Low Viscosity

H.B. Fuller EV Bond 705 is a low viscosity non-reactive hot melt pressure sensitive adhesive (PSA) with aggressive tack and good adhesion to various substrates. Its Low viscosity allows for precise application at a wide range of production speeds in EV pouch cell battery bonding or as a process aid in EV Battery construction.

H.B. Fuller EV Bond 420

RTU Product Type:Reactive Adhesive, Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Acrylic, Gelcoat, Phenolics, Coated Surfaces, Metal, Epoxies, Acrylonitrile Butadiene Styrene (ABS), Composites, Fiberglass, RIM Urethane, Polycarbonate (PC), Plastics, Stainless Steel, Aluminum, Polyurethane
Chemical Family:Acrylics & Acrylates
Features:Low Odor, Room Temperature Curing, Excellent Performance, High Impact Resistance, Flame Retardant, High Durability, Good Adhesion, Good Bonding Strength, Chemical Resistant, Good Weather Stability, High Reliability

H.B. Fuller EV Bond 420 is a high-performance, two-part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. EV Bond 420 greatly increases the reliability of finished assemblies, its ability to withstand extreme temperature fluctuations, and its resistance to a wide range of chemicals and environmental conditions. EV Bond 420GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Bond 720

RTU Product Type:Solvent free (100% Solids) Adhesive, Hot Melt Reactive Adhesive, 1K (1 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries
Compatible Substrates & Surfaces:Glass, Plastics, Glass, Primed, Wood, Metal
Chemical Family:Polyurethanes (PU)
Features:No Flow During Application, Hot Tack Strength, Excellent Initial Seal Strength, Low Temperature Flexibility, Good Thermal Stability, High Temperature Strength, Low Outgassing, Fast Setting, Dimensional Stability, Quick Strengthening, Good Adhesion, No Expulsion During Application

H.B. Fuller EV Bond 720 is designed to set quickly and strengthen within 3-4 minutes. Fully moisture-cured material displays excellent high temperature strength, tested up to 120°C. Rapid shipment of bonded parts is possible, as H.B. Fuller EV Bond 720 will not flow or expulse at 120°C, preserving bonded geometry at high temperatures before fully moisture-cured. This patented reactive hot melt moisture curing material is a one component polyurethane, 100% solid adhesive. Excellent adhesion strength is achieved within 10 seconds to 3 minutes after dispensing. This product has aggressive hot tack and cures in the presence of moisture into a tough bond. It works well in bonding various plastics, woods, metals, and primed glass substrates.

H.B. Fuller EV Therm 441

RTU Product Type:Reactive Adhesive, Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries
Compatible Substrates & Surfaces:Acrylic, Gelcoat, Phenolics, E-Coated Surfaces, Polyethylene Terephthalate (PET), Plated Steel, Thermoplastics, Poly(p-Phenylene Oxide) (PPO), Thermosetting Plastics, Nylon, Metal, Polyether Ether Ketone (PEEK), Epoxies, Acrylonitrile Butadiene Styrene (ABS), Fiberglass, RIM Urethane, Polycarbonate (PC), Polyamide, Stainless Steel, Aluminum, Polyurethane, Vinyl, Engineering Plastics, Polybutylene Terephthalate (PBT), Polystyrene (PS), Polyvinyl Chloride (PVC)
Application Method:Dispensing Equipment, Pneumatic Gun
Chemical Family:Acrylics & Acrylates
Features:Wide Temperature Operating Range, Room Temperature Curing, Excellent Performance, Excellent Multi-Substrate Adhesion, High Impact Resistance, Flame Retardant, High Viscosity, Excellent Toughness, Good Adhesion, Excellent Strength, Good Bonding Strength, Ease Of Use, Good Thermal Conductivity

H.B. Fuller EV Therm 441 is a modified, highly engineered Structural Acrylic Adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. H.B. Fuller EV Therm 441 is an excellent flame retardant with a UL94 V0 rating.

H.B. Fuller EV Protect 5008

RTU Product Type:Encapsulant
Application Area:Electric Vehicle (EV), Batteries

H.B. Fuller EV Protect 5008 is an encapsulant used in adhesives and sealants. It is designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

H.B. Fuller EV Bond 440

RTU Product Type:Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries
Compatible Substrates & Surfaces:Acrylic, Gelcoat, Phenolics, E-Coated Surfaces, Polyethylene Terephthalate (PET), Poly(p-Phenylene Oxide) (PPO), Coated Surfaces, Nylon, Metal, Polyether Ether Ketone (PEEK), Epoxies, Acrylonitrile Butadiene Styrene (ABS), Composites, Fiberglass, RIM Urethane, Polycarbonate (PC), Plastics, Polyamide, Stainless Steel, Aluminum, Polyurethane, Vinyl, Polybutylene Terephthalate (PBT), Polystyrene (PS), Polyvinyl Chloride (PVC)
Chemical Family:Acrylics & Acrylates
Features:Room Temperature Curing, Good Weather Fastness, High Impact Resistance, High Temperature Resistance, High Durability, Good Adhesion, Good Bonding Strength, High Performance, Chemical Resistant, High Reliability

H.B. Fuller EV Bond 440 is a high performance two part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. EV Bond 440 greatly increases the reliability of finished assemblies, it’s ability to with stand extreme temperature fluctuation, and resistance to a wide range of chemicals and environmental conditions.

H.B. Fuller EV Therm 420

Chemical Family:Acrylics & Acrylates
Compatible Substrates & Surfaces:Metal, Epoxies, Acrylonitrile Butadiene Styrene (ABS), Fiberglass, Acrylic, RIM Urethane, Polycarbonate (PC), Gelcoat, Phenolics, E-Coated Surfaces, Stainless Steel, Aluminum, Polyurethane, Thermoplastics, Thermosetting Plastics
Features:Good Adhesion, Room Temperature Curing, Good Strength, Excellent Multi-Substrate Adhesion, Wide Temperature Operating Range, High Impact Resistance, Good Thermal Conductivity

H.B. Fuller EV Therm 420 is a modified, highly engineered Structural Acrylic Adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates.

H.B. Fuller 7012

Chemical Family:Acrylics & Acrylates
RTU Product Type:Reactive Adhesive, Thermal Adhesive, 1K (1 component) Adhesive
Application Area:Batteries, Electric Vehicle (EV) Batteries, Battery Cells
Features:High Strength, Long Open Time, Good Thermal Conductivity

H.B. Fuller 7012 is a one-component reactive adhesive with excellent thermal conductivity, specifically designed for bonding battery cells to module bases in electric vehicle applications. It offers a long open time for easy handling while providing immediate fixture strength. This adhesive belongs to the acrylics and acrylates chemical family and is known for its high strength and good thermal conductivity.

H.B. Fuller 1521

Chemical Family:Silicones
RTU Product Type:2K (2 component) Adhesive, Potting Compound, Reactive Adhesive, Encapsulant
Application Area:Frame Sealing, Edge Gluing, Lithium-Ion Battery, Solar Panel, Blades, Junction Boxes, Batteries, HVAC Applications, Rail Bonding, Electronic Components, Energy Storage, PV Modules, Turbines, Module Installation, Ingot Bonding
Compatible Substrates & Surfaces:Glass
Features:Good Electrical Properties, Fast Cure, Room Temperature Curing, Rapid Cure Response, Excellent Sealing Capability, Good Adhesion, Good Thick Section Cure, Enhanced Damp Proofing

H.B. Fuller 1521 is a two-component, room-temperature-cure silicone system. It has very low ionic content and can be used for electronic component applications and electronics potting. Its applications include appliance sealing, connector sealing, and junction box potting. Additionally, it has good thermal conductivity and flame retardancy.

Show

of 32 results