Products

Tonsan® 1581 White is one component material that is unaffected by moisture in the air. This material is recommended for sealing the side frames of solar cells and sealing the solar energy lamps. alkoxy-cure silicone adhesive cures at room temperature when exposed cells are sealed or adhered to the junction boxes of solar cells.

Tonsan® 1533 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has excellent dielectric properties and V1 flame retardancy.

H.B. Fuller PHOTOCAP® 6048 is a thermoplastic, non-EVA-based encapsulating film designed for use in thin film modules.  It has a low MVTR (moisture vapor transmission rate), a short lamination cycle, and good creep resistance with proven longevity in the field.

Tonsan® 1527 White is a high-quality, one-component sealant based on silicone polymer. It cures by a chemical reaction with moisture to an elastic product. This material is recommended for sealing the side frames of solar cells and for sealing the solar energy lamps. cell, sealing or adhering the junction boxes of solar,

Rakoll® GXL 3 is an easy-to-apply adhesive that is suitable for many processing conditions and provides very strong bonding. As a PVAc adhesive, it meets the requirements of class D3 as a one-component product. When mixed with Rakoll® GXL-3-Härter, it meets the requirements for the D4 standard DIN EN 204.

Tonsan® 1522 White is a two-component adhesive that can cure quickly at room temperature, providing high bond strength. This material is specifically recommended for use with metals, plastics, and glass, and is particularly suitable for sealing and bonding PV modules.

H.B. Fuller PHOTOCAP® 15585P is an ultrafast-curing, PID-resistant EVA (ethylene vinyl acetate copolymer) photovoltaic encapsulating film with HLT™ higher light transmission in the UV wavelength region to allow greater power generation with blue light-sensitive photovoltaic devices. It has a short lamination cycle, excellent light transmission, and outstanding stability in the field.

Tonsan® 1521 Black is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, typically for the junction box on PV modules. It also has good thermal conductivity and flame retardancy.

H.B. Fuller PHOTOCAP® 3610 ™ is an ultra-fast cure and PID resistant thermoset polyolefin encapsulant with HLT™ higher light transmission in the UV wavelength region to allow greater power generation with blue light-sensitive photovoltaic devices. It has a low MVTR, a short lamination cycle, and excellent light transmission with no acetic acid concerns.

Tonsan® 1521 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has good thermal conductivity and flame retardancy.

Tonsan® 1581 is a one-part RTV alkoxy-cured silicone specifically designed for FIPG gasketing applications. It is known for its excellent sealing properties and is commonly used for sealing enclosures and packs. This silicone adhesive is an ideal choice for EV sealants.

Tonsan® 1522 Black is a two-component adhesive that can cure quickly at room temperature, providing high bond strength. This material is recommended for use with metals, plastics, and glass. Typical applications of the product involve the sealing and bonding of PV modules.

H.B. Fuller PVA 600T is a black, high-performance pressure-sensitive tape with a butyl adhesive. It offers very high tack and excellent adhesion, making it an ideal peel and stick bonding solution. The tape also provides excellent weather resistance for long-lasting performance. It is designed for bonding various materials such as aluminum, galvanized and painted metal, glass, concrete, modified bitumen, FRP, engineered plastics, TPO, EPDM, elastomeric coatings, PVC, and plastic films. PVA 600T is commonly used for sealant tapes and patches.

Tonsan® 1523 is a white, one-component, neutral to moisture in the air adhesive. It is recommended for bonding with fast and excellent adhesion for glass, aluminum alloy, etc., and is an alkoxy-cure silicone adhesive that cures at room temperature when exposed to the back rail of a PV module. This material also has high performance.

Rakoll® TE5700 is a versatile hot-melt adhesive known for its cost-effectiveness and wide range of applications. It is particularly suitable for edge banding, offering reliable bonding for both standard and high-speed processes. The adhesive exhibits good heat resistance and adhesion properties, ensuring durable and high-quality results for furniture components.