Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Application Instructions
- For best result, clean and dry all surface to be sealed.
- Apply a continuous and even bead of silicone to one surface.
- Assemble parts. Remove excess with knife.
- Curing Profile
Recommended cure: Curing depth is 2mm at 21 - 25°C, 45 - 55% RH for 24h
Properties
- Color (Properties)
- Physical Form
- Appearance
- Black paste
- Typical Properties
Value Units Test Method / Conditions Curing Temperature (at 45 - 55 %RH, 24 hr) 21 - 25 °C - - Cured Mechanical Properties
Value Units Test Method / Conditions Adhesion Strength (Measured on cured sheets ~2mm, Cured at 21 - 25°C, 45 - 55 % RH for 14 days, tested at 21 - 25°C) 1.8 MPa GB/T 7124 Adhesion Strength (Measured on cured sheets ~2mm, Cured at 21 - 25°C, 45 - 55 % RH for 14 days, tested at 21 - 25°C) 1.8 MPa ISO 4587 Tensile Strength (Measured on cured sheets ~2mm, Cured at 21 - 25°C, 45 - 55 % RH for 14 days, tested at 21 - 25°C) 2.3 MPa GB/T 528, ISO 37 Elongation at Break (measured on cured sheets ~2mm, Cured at 21 - 25°C, 45 - 55 % RH for 14 days, tested at 21 - 25°C) 300 % GB/T 528, ISO 37 Hardness (measured on cured sheets ~2mm, Cured at 21 - 25°C, 45 - 55 % RH for 14 days, tested at 21 - 25°C) 48 Shore A GB/T 531, ISO 7619 - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 20 kV/mm GB/T 1695, IEC 60243-1 Volume Resistivity 1.0 x 10¹⁵ Ω-cm GB/T 1692, IEC 60093 - Cured Properties
Value Units Test Method / Conditions Operational Temperature* (cured at 21 - 25°C, 45 - 55 % RH) - 54 to 210 °C GB/T 5208, ISO 3679 Curing Depth (at 21 - 25°C, 45 - 55%RH, 24 hr) 2 mm - Curing Rate (at 21 - 25°C, cured fixture/full, 45 - 55% RH, 24h, Test method issued date 2008) 6 g/m²/h GB/T 5208 Curing Rate (at 21 - 25°C, cured fixture/full, 45 - 55% RH, 24h) 6 g/m²/h ISO 3679 Flash Point (cured at 21 - 25°C, 45 - 55 % RH, Test method issued date 2008) min. 93 °C GB/T 5208 Flash Point (cured at 21 - 25°C, 45 - 55 % RH) min. 93 °C ISO 3679 - Technical Data
Value Units Test Method / Conditions Viscosity White paste - - Density 1.37 g/cm³ - Extrusion Rate 10 - 20 s/20g - Work Life 5 - 15 m - - Damp Heat Aging Test Properties
Value Units Test Method / Conditions Tensile Strength (at 85°C, 85% RH, 1000h) 1.6 MPa GB/T 528, ISO 37 Elongation at Break (at 85°C, 85% RH, 1000h) 320 % GB/T 528, ISO 37 - Note
* - Cure speed will vary with temperature, relative humidity, depth of material and presence of moisture.
** - Measured on cured sheets approx. 2mm. Cured at 21 - 25°C, 45 - 55% RH for 14 days, tested at 21 - 25°C.
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
- 310ml
- 400ml
- 600ml
- 235kg
Storage & Handling
- Shelf Life
- 12 months
- Storage Condition
Product shall be ideally stored in a cool, dry area in unopened containers at room temperature.
- Disposal Advice
- Allow adequate ventilation when using.
- Avoid prolonged skin contact.
- In case of eye contact, flush with water and seek medical attention.
- This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.