Products

H.B. Fuller MP54110 is a two-part unfilled epoxy adhesive designed for bonding of metals, ceramics, and most plastics. This product gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. This product has better water and temperature resistance than standard 5-minute epoxy. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 30 - 60 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Millennium EPDM Edge Sealant is a patented, specially formulated sealant designed to seal the exposed edges of EPDM membrane splices. Made from high solids and low VOC EPDM, this sealant exhibits excellent adhesion to EPDM membranes. Its unique formula ensures optimal performance in a range of applications, providing superior durability and adhesion.

H.B. Fuller EA6062 is a fast UV-cure adhesive with a high depth of cure. This product is very soft and flexible and has excellent adhesion and dimensional stability after dispensing. It can be used as a re-enterable form-in-place or cure-in-place gasket material. H.B. Fuller EA6062 has excellent compressibility, elastic recovery, and low compression set.

H.B. Fuller 1527 White, also called 1527SWT, is a white, UL-certified, one-component RTV silicone with super resistance to weathering and ultra violet (UV). This material has very good adhesion without the need for primers to a wide range of substrates. It can be used for a variety of interior and exterior bonding and sealing applications. 1527 White is formulated to perform at temperatures ranging from -54°C to 210°C.

Körapop 250 is a one-component elastic adhesive and sealant that utilizes silane-modified polymer chemistry. This product is characterized by its very high strength and non-sag properties, making it ideal for a wide range of applications. It offers high flexibility and provides high adhesion to many substrates without requiring primers. Additionally, Körapop 250 boasts exceptional resistance to UV, weather, and aging.

Körapur® 177 is a one-component, flexible and high-performance direct glazing sealant designed for vehicle glass. The product is a polyurethane-based sealant that prevents contact corrosion in aluminum-body vehicles and is suitable for use with integral aerials. It has good stability and workability, with a non-sag consistency that makes it easy to apply.

Körapop 225-2K is a two-component adhesive and sealant based on silane-modified polymer chemistry. It is a non-sagging, elastic product that offers good strength and high flexibility. This adhesive provides exceptional adhesion to many substrates without requiring primers. The product also boasts outstanding UV, weather, and aging resistance.

Weld Mount AT-4020, a cutting-edge two-part methacrylate adhesive tailored for robust bonding across plastics, metals, and composite assemblies. Unveil its exceptional bond strength, unmatched durability, and remarkable impact and weathering resistance. Notably, its elevated viscosity secures Weld Mount parts steadfastly, eliminating concerns of sagging during application. Trust AT-4020 to elevate assembly reliability by enduring extreme temperatures, thermal cycling, chemicals, and environmental rigors. It's not just an adhesive; it's your assurance of resilience and steadfastness.

H.B. Fuller 1527T is a translucent-colored RTV silicone. It has good weather resistance and excellent electrical insulation properties, being especially resistant to sulfur hexafluoride and transformer oil. Typical applications include electrical insulation, protecting leads from mechanical shock, bonding trim, sealing ductwork, vents, flues, doors, and windows, and sealing and waterproofing of transformers.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

Körapop 240-2K is a two-component elastic adhesive and sealant based on silane-modified polymer chemistry. It is a boosted, high-strength, and non-sag product that offers both high strength and flexibility. The adhesive also provides high adhesion without the need for primers on many substrates. Additionally, it boasts outstanding resistance to UV, weather, and aging.

Adcotherm HMC-7RC is a hot-applied butyl rubber-based adhesive and sealant that bonds to various substrates, creating a permanent seal against moisture, dust, and air intrusion. It exhibits excellent adhesion to glass, EPDM, PVC, and painted metal substrates and is highly resistant to both interior and exterior environmental conditions.

Körapur® 925 Marine is a marine-grade, high-strength, non-sag, one-component elastic adhesive and sealant based on silane-modified polymer chemistry. It is an elastic, one-part system of polyurethane adhesive and sealant that utilizes moisture curing. It exhibits high cold resistance, high heat resistance, excellent moisture resistance, and excellent weather resistance.

Körapur® 140 is a single-component, elastic, moisture-curing polyurethane adhesive used for bonding and sealing primered and varnished metals, aluminum, wooden materials, and duroplastics. This high-strength, elastic adhesive has excellent properties such as high cold resistance, high heat resistance, excellent moisture resistance, and excellent weather resistance.

H.B. Fuller 46580/56580 is a thixotropic, extra-fast-setting, two-component epoxy adhesive. It has a convenient mix ratio, excellent sag resistance when applied to vertical surfaces, and a smooth paste consistency. It is recommended for rapid repairs and electrical and industrial staking. H.B. Fuller 46580/56580 extra-fast setting epoxy is an excellent general-purpose adhesive. It is recommended for substrates such as metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. H.B. Fuller 46580/56580 is available in the unique DOUBLE-BUBBLE® job-sized package as Reorder No. 04008.