Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Application Instructions
- For best result, clean and dry all surface to be sealed.
- Use double sticky tape on the surface of aluminum alloy back rail for bonding and positioning (the distance between of the tape is about 300mm - 400mm, tape thickness is about 3 - 5mm).
- Apply a continuous and even bead of silicone adhesive to the surface of aluminum alloy.
- Then bond immediately.
Recommended cure: Curing depth is 2mm at 21 - 25°C, 45 - 55% RH for 24h
Properties
- Color
- Physical Form
- Appearance
- White paste
- Cured Mechanical Properties
- Electrical Properties
- Technical Data
- Cured Properties
- Damp Heat Aging Test Properties
- Rheological Properties
- Note
* - Measured on cured sheets approx. 2mm. Cured at 21 - 25°C, 45 - 55 % RH for 14 days, tested at 21 - 25°C
| Value | Units | Test Method / Conditions | |
| Hardness* | 45.0 | — | ISO7619, GB/T531, Shore A |
| Elongation at Break* | 260.0 | % | ISO37, GB/T528 |
| Tensile Strength* | 2.5 | MPa | ISO37, GB/T528 |
| Adhesion Strength* | 2.0 | MPa | ISO4587, GB/T7124 |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 1.0 x 10¹⁵ | Ω.cm | IEC60093, GB/T1692 |
| Breakdown Tension | 20.0 | kV/mm | IEC 60243 -1, GB/T16- -95 |
| Value | Units | Test Method / Conditions | |
| Density | 1.43 | g/cm³ | — |
| Value | Units | Test Method / Conditions | |
| Flash Point | 93.0 | °C | ISO3679,GB/T 5208-2008 |
| Cure Speed (Fixture/full, Cured at 21 - 25°C, 45 - 55% RH, 2mm) | 3.0 | min/24h | — |
| Operating Temperature Range | - 54 - 210 | °C | — |
| Value | Units | Test Method / Conditions | |
| Elongation at Break (at 85°C, 85% RH, for 1000h) | 260.0 | % | — |
| Tensile Strength (at 85°C, 85%RH, 1000h) | 1.8 | MPa | — |
| Adhesion Strength (at 85°C, 85% RH, 1000h) | 1.5 | MPa | — |
| Value | Units | Test Method / Conditions | |
| Viscosity | White paste | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety and Disposal
- Allow adequate ventilation when using.
- Avoid prolonged skin contact.
- In case of eye contact, flush with water and seek medical attention.
- This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
- 310 ml
- 400 ml
- 270 kg
Storage & Handling
- Storage Condition
Product shall be ideally store in a cool, dry area in unopened containers at a temperature between 8°C to 28°C unless otherwise labeled. Optimal storage is at the lower half of this temperature.