Products

ProSpec® Premium Patch 200 is a rapid-setting, fiber-reinforced, high-strength cement mortar, polymer-modified for durable concrete repair and overlay applications.

ProSpec® Premium Patch 100 is a fast-setting, fiber-reinforced, high-strength cement-based repair mortar that provides quick early strength gain, minimizing downtime for repair applications.

Hydra FAST-EN® Bond Plus® DC-13674 is a water-based adhesive. It is used for bonding EPDM and TPO membranes for use in RV roofing and flooring applications. It has excellent resistance to heat and moisture and is flexible at temperatures as low as -40°F. This product has good adhesion to metal, plywood, and concrete.

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

H.B. Fuller HMC-1 is a blend of select polymers formulated for use as an indoor and outdoor deck lid weatherstrip. The sealant is homogeneous and completely resistant to moisture. Has good adhesion to rubber weatherstrips and basecoat/clearcoat paint systems. It exhibits excellent heat resistance and long-term weathering.

Tonsan® 1523 is a white, one-component, neutral to moisture in the air adhesive. It is recommended for bonding with fast and excellent adhesion for glass, aluminum alloy, etc., and is an alkoxy-cure silicone adhesive that cures at room temperature when exposed to the back rail of a PV module. This material also has high performance.

Millennium PG-1 Pump Grade (Low Viscosity Insulation) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. The application process is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart* (by Garlock) or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.

UltraShield AC 10 is a single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

FAST 2K™ DECK POST ANCHOR is a patented expanding composite designed to fill the peripheral void between a post and the hole for load-bearing applications. This product builds on the technology of the award-winning and widely successful FAST 2K™ and pole-setting expanding composite backfill used to set fences and utility poles for more than 20 years. The expanding nature of this product allows the use of up to 90% less weight in the FAST 2K™ DECK POST ANCHOR compared to concrete.

UltraShield AC 11 is a high-quality, single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.