Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Room temperature cure
- Extra fast setting
- Excellent cohesive strength
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- General Instructions
Fast-Setting Epoxy can be used to repair tools, auto parts, electrical and electronic components, furniture and other applications that require a fast-setting adhesive. Surface must be clean and dry before application. Remove all chemicals, dirt, wax and oil. To obtain the best cured properties, accurate proportioning and thorough mixing are essential.
Properties
- Color
- Physical Form
- Component A
- Component B
- Cured Mechanical Properties
- Uncured Properties
- Rheological Properties
Value | Units | Test Method / Conditions | |
Viscosity | 55000.0 | cP | — |
Value | Units | Test Method / Conditions | |
Viscosity | 10000.0 | cP | — |
Value | Units | Test Method / Conditions | |
Overlap Shear Strength (30 min, Aluminum, acid etched at 25°C) | 1000.0 | psi | — |
Overlap Shear Strength (60 min, Aluminum, acid etched at 25°C) | 1500.0 | psi | — |
Overlap Shear Strength (15 min, Aluminum, acid etched at 25°C) | 150.0 | psi | — |
Elongation at Break | 8.5 | % | ASTM D638 |
Hardness | 80.0 | — | ASTM D2240 |
Tensile Strength | 7250.0 | psi | ASTM D638 |
Overlap Shear Strength (Aluminum, acid etched at 82°C, at 50% RH) | 655.0 | psi | ASTM D1002 |
Overlap Shear Strength (Aluminum, acid etched at 93°C, at 50% RH) | 300.0 | psi | ASTM D1002 |
Overlap Shear Strength (Aluminum, acid etched at 149°C, at 50% RH) | 245.0 | psi | ASTM D1002 |
Overlap Shear Strength (Aluminum, acid etched at -40°C, at 50% RH) | 1695.0 | psi | ASTM D1002 |
Overlap Shear Strength (Aluminum, acid etched at 38°C, at 50% RH) | 2400.0 | psi | ASTM D1002 |
Overlap Shear Strength (Aluminum, acid etched at 66°C, at 50% RH) | 1100.0 | psi | ASTM D1002 |
Overlap Shear Strength (Aluminum, acid etched at 25°C, at 50% RH) | 3000.0 | psi | ASTM D1002 |
T-Peel Strength (at 82°C, acid etched Al-Al) | 2.5 | pli | — |
T-Peel Strength (Acid etched Al-Al) | 1.8 | pli | — |
T-Peel Strength (at -40°C, acid etched Al-Al) | 1.5 | pli | — |
Operating Temperature | 82.0 | °C | — |
Value | Units | Test Method / Conditions | |
Specific Gravity (Mix) | 1.16 | — | — |
Specific Gravity (Part A) | 1.2 | — | — |
Specific Gravity (Part B) | 1.13 | — | — |
Gel Time (at 25°C, 4 gram) | 3 - 5 | min | — |
Handling Time | 15 - 30 | min | — |
Weight Mix Ratio | 1900-01-03T05:34:00+00:00 | — | — |
Full Cure (at 23°C) | 24.0 | h | — |
Value | Units | Test Method / Conditions | |
Viscosity (Mixed) | 40000.0 | cP | — |
Packaging & Availability
- Storage Conditions
Fast-Setting Epoxy can be used to repair tools, auto parts, electrical and electronic components, furniture and other applications that require a fast-setting adhesive. Surface must be clean and dry before application. Remove all chemicals, dirt, wax and oil. To obtain the best cured properties, accurate proportioning and thorough mixing are essential.
Storage & Handling
- Shelf Life
- 24 Months