SILAPRENE® DC-11691/M6127

1 of 22 products in this brand
SILAPRENE® DC-11691/M6127 is a black, brushable, premium-grade contact adhesive that is suitable for use as a general-purpose bonding agent. This adhesive provides tough, durable bonds to many surfaces and is suitable for brush or roll coat application. It has excellent early strength, with a 20-minute open time.

Product Type: Contact Adhesive

Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Ceramic, Elastomers & Rubbers, Epoxies, Fiberglass, Film, Glass, Masonry, Metal, Plastics, Wood

Application Method: Brush, Roll Coater

Chemical Family: Polychloroprenes

Features: Excellent Strength, Gasoline Resistant, General Purpose, Heat Resistance, Moisture Resistant, Oil Resistant, Water Resistant

Technical Data Sheet
Message our experts with questions
Robert Blackstone avatar

Robert Blackstone

Global Leader - Inside Sales

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

Enhanced TDS

Identification & Functionality

Chemical Family
Product Type

Features & Benefits

Applications & Uses

Application Method
Application Instructions

Preparation of substrates:

  • Surfaces to be bonded should be cleaned of all dust, oils or other contaminates. A solvent wipe is often adequate.
  • Bonds to rigid surfaces are usually improved by a solvent wipe followed with light abrasion (180 grit), and solvent wiping to remove abrasive residue. Dry surfaces thoroughly before applying adhesive.

Method of application:

  • Stir thoroughly until product is a consistent color before using. Apply one coat of adhesive by brush or roll coat onto each surface to be bonded.
  • Porous materials, such as fabric, foam or wood may require two coats of adhesive. Join the surfaces when the adhesive is tacky to the touch but does not transfer to the finger.
  • Use sufficient pressure to ensure good contact. Bonds can be made in 3 to 5 minutes, depending on ambient conditions and substrate coating weight.
  • If the adhesive becomes too dry, it may be reactivated with a cloth dampened with Toluene or MEK. Join surfaces immediately after reactivation.

Cleaner and thinner: Toluene.


Soluble in
Toluene, MEK
Typical Properties
ValueUnitsTest Method / Conditions
Solid Content34.0%-
Viscosity (spindle 3, 20 rpm)1300 ,cPRVF Brookfield
Weight per Gallon7.2lb-
Specific Gravity0.915--
Temperature Range- 40 - 275°F-

Safety & Health

Precautionary Data

This product is extremely flammable. Vapors may form an explosive mixture with air. Precautions should be taken to keep product away from fire, sparks, motors and other sources of heat or flame. Turn off or deactivate any electrical equipment or sources of ignition. Adequate ventilation is required to keep vapor concentrations below the Threshold Limit Value.

  • Keep away from children.
  • Keep container closed when not in use
  • Store closed container under 80°F.
  • This product contains a toxic chemical subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-to-Known act of 1986 and 40 CFR 372.

Storage & Handling

Shelf Life
1 Year