Products

Tuskbond ONE Gold - 22L Canister is a fast-drying, versatile, sprayable contact adhesive, suitable for bonding or sealing a wide range of products. The adhesive provides a heavier adhesive coat, good temperature resistance and a long open time. Tuskbond ONE GOLD is ideal for permanent bonds that require good initial bond strength. It provides an aggressive, fast, strong and permanent water resistant bond. https://youtu.be/6DJVUeTpupo?si=La8nZ7P9nxOs49FU

Tuskbond ONE - 500ml Aerosol is a fast-drying, versatile, contact adhesive, suitable for bonding or sealing a wide range of products. The adhesive provides good temperature resistance and a long open time. Tuskbond ONE is ideal for permanent bonds that require good initial bond strength. It provides an aggressive, fast, strong and permanent water resistant bond. ● https://youtu.be/6tNwrU1wE8A?si=lXb-hVCwlR4ZaqMi

Beauty 24+ Hour Wear provides water- and oil-resistant, active-proof wear with a secure 24+ hours hold. Available in black and clear.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

RBUV213A is a single-component, low-viscosity anaerobic thread-locking adhesive with a UV-initiated surface cure component. It prevents the loosening and leaking of threaded fasteners and is ideal for preassembled components, where its low viscosity and capillary action allow it to wick into threaded assemblies. Additionally, RBUV213A can be used to fill porosity in welds and castings.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

Cyberbond CB 2006 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The overall properties made CB 2006 (like CB 2008) a favorable EPDM bonder. Compared to CB 2008 the viscosity is slightly higher. In addition, the low viscosity allows for very thin bond layers. CB 2006 should be considered the first choice in this viscosity range.

Swift®tak 49380 is formulated for high-performance laminating applications, exhibiting excellent resistance to heat, moisture, and cold temperatures. Additionally, it has specific adhesion to difficult substrates, such as vinyl, paper, and some plastics, making it an excellent choice for bonding these materials.

Foster® Cryogenic Adhesive 82-77 is a chemically curing adhesive with the capability to achieve high tensile strength and adhesion at room temperature. It effectively bonds to a range of surfaces, including metal, wood, and masonry. This adhesive is supplied in a virtually 100% solids form, facilitating immediate bonding for non-porous surfaces without the risk of solvent entrapment issues.

Cyberbond CB 1070 is very suitable for metal-to-rubber or plastic combinations. It is not recommended for bonding metal to metal. Due to its viscosity, CB 1070 should be considered the most favorable grade in this series. It is a general-purpose cyanoacrylate that is fast-bonding and has low viscosity.

Foster® Full Defense™ Fungicidal Protective Coating 40-25 is designed to eliminate any remaining mold and mildew after pre-cleaning contaminated surfaces. It also provides protection to various building materials, including unfinished wood, drywall, oriented strand board, metal, masonry, and more, safeguarding them from fungal growth.

Childers® Chil-Duct™ CP-148 Sealant/Mastic is a fibrated water-based duct sealant and mastic designed for all heating, ventilating, and air conditioning duct systems. It can be easily applied with a brush and does not drip or sag during application. Once dry, it creates a durable, flexible, UV- and water-resistant air seal.

Cilbond® 62W is a trusted and high-performance water-based one-coat friction system designed for compounds used in the Friction Industry. It is primarily used in the manufacturing of products like original equipment (OE) and after-market brake pads. It bonds to all metals commonly used in brake pad production, including Zn/Ni coatings.

Cyberbond CB 2028 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The medium viscosity of CB 2028 is considered favorable for manual applications. It is fast-bonding and has medium viscosity along with good aging properties.