PVC TrimWelder™ Nail Erasers

1 of 9 products in this brand

PVC TrimWelder™ Nail Erasers is the easiest way to fill brad, staple, and nail holes in PVC trim board that will remain unpainted. If the trim is to be painted, use PVC TrimWelder™ Fast Cure for best results. PVC TrimWelder™ Nail Eraser™ contains a special blend of fillers to resist yellowing and has been laboratory tested for hole retention on cellular PVC at 140°F.

Product TypeWax Filler

Application AreaComposite Industrial Panel, Panels

FeaturesGood Non-Yellowing Properties, Water Resistant

Chemical FamilyWaxes

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Chemical Family
Product Type
Product Information
Technology / Base Wax filler
Type of Product Microcrystalline and Fischer Tropsch waxs
Curing Mechanism None
Appearance / Color Bright white
Consistency Hard stick

Features & Benefits

Key Attributes
  • Fills holes in PVC board without the need to paint
  • Matches white PVC trim boards
  • Resists yellowing
  • Easy to apply
  • Repels water

Applications & Uses

Application Instructions

PVC TrimWelder™ Nail Eraser™ comes ready-to-use. Scrub the tip back and forth over the hole until full. Wipe the PVC trim board clean and flush with a dry cloth or paper towel.

Typical Applications

PVC TrimWelder™ Nail Eraser™ was designed to fill brad, staple and nail holes in PVC trim board that will remain unpainted.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
ViscositySolid
Specific Gravity0.85
Melting Point135.0°F
Flash Pointmin. 400°F

Packaging & Availability

Country Availability
Regional Availability
  • USA
Packaging Information

Typically sold in convenient Blister Packs of 24 per box.

Storage & Handling

Shelf Life
12 Months
Storage Information

Store in an unopened original container in a cool, dark area between 55°F to 75°F.