Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Low odor Acrylic Adhesive
- Strong and durable adhesion
- Minimal surface preparation
- 1:1 mix ratio
- Excellent shear and peel strength
- High bond strength to stainless steel and galvanized steel
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- General Instructions
- For best performance bond surfaces should be clean and free of grease. Extensive surface preparation is not required.
- Mixing part A and part B in the correct ratio and mix thoroughly. Once mixed, it should achieve a uniform color. It is recommended that either meter mix equipment or cartridges with static mix nozzles be used to properly ratio and dispense the adhesive.
- To assure maximum bond strength, surfaces must be mated within the adhesive’s open time. Use enough material to completely fill the joint when parts are clamped.
- Do not return unused material to container as it would result in contamination and/or premature hardening of contents
Properties
- Typical Properties
Value Units Test Method / Conditions Mixed Density 1.05 g/cc GB/T 13477.2 Volume Mix Ratio 1:1 - - Weight Mix Ratio 1:1 - - - Uncured Properties
Value Units Test Method / Conditions Open Time 10.0 min - Fixture Time 15.0 min - Cure Temperature Room temperature - - Cure Time 24.0 h - Over Lap Shear Strength (Carbon steel, cohesive failure) 25.8 MPa GB/T 7124 Over Lap Shear Strength (Aluminum, Cohesive failure) 23.5 MPa GB/T 7124 Over Lap Shear Strength (Stainless steel, cohesive failure) 24.5 MPa GB 7124 Over Lap Shear Strength (Galvanized steel, cohesive failure) 23.8 MPa GB/T 7124 - Rheological Properties
Value Units Test Method / Conditions Viscosity (Resin, 20 rpm, at 25°C) 240,000 - 290,000 cP Brookfield RV7 Viscosity (at 25°C, 20 rpm) 120,000 - 160,000 cP Activator Brookfield RV7 - Note
- CF = Cohesive Failure
- AF = Adhesive Failure
- MM = Mixed (Mode of AF and CF)
- SF = Substrate Failure/Break/Yield
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 9 Months
- Handling and Clean-Up
Clean up is best before the adhesive has cured. Cleaners containing NMP (N-methyl pyrolidone) or Citrus terpene provide the best results. On cured adhesive repeat use may be required.
- Storage
TS820 Low odor Structural Adhesive should be stored in unopened containers in a cool, dry area at a temperature between 8°C and 25°C.