Products

H.B. Fuller EA6033 is a fast UV-cure adhesive. This product is suitable for bonding a wide variety of substrates, including glass, many plastics, and most metals. H.B. Fuller EA6033 has shown excellent adhesion and is flexible. It can be used for BGA reinforcement.

Tonsan® EP832 is an epoxy adhesive known for its high strength, good toughness, and heat resistance up to 150°C in the long term and 180°C in the short term. With its low viscosity, it is suitable for potting bonding and exhibits excellent bonding performance to metal, stone, wood, ceramic, and most plastics. This adhesive is commonly used in the electric vehicle industry.

H.B. Fuller EV Protect 5006 offers battery designers the ability to integrate high-level structural performance characteristics into their battery system, which is ideal for cell to pack applications. This ultra-lightweight material minimizes weight addition to the battery pack and, when exposed to a thermal event, significantly reduces or delays thermal propagation. With a reduced viscosity and improved curing speed, the EV Protect 5006 is especially advantageous for those with unique, complex, or intricate battery design architecture. Works in all types of battery cell form factors (cylindrical, prismatic, or pouch).

H.B. Fuller EH9650 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material that cures in the presence of moisture. The material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9650 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, plastic-coated wires, common engineered plastics (ABS, PET, PP, vinyl), and woven fabrics, without the need for primers.

Tonsan® SN103W is a highly regarded silicone adhesive that boasts a de-alcohol formulation, a low odor, and excellent non-yellowing properties. Engineered for the specific purpose of sealing and bonding electronic and electrical equipment, it is a perfect fit for electric vehicles.

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

H.B. Fuller EV Protect 4006 is a liquid-applied, two-component, flame-retardant, low-density polyurethane foam material designed for the potting and encapsulation of battery cells in EV battery modules. EV Protect 4006 SFR offers battery design engineers the ability to increase the power density of their modules while enhancing safety and protection from thermal propagation. The ultra lightweight nature of the EV Protect 4006 SFR minimizes the weight impact to the battery modules. The semi-structural properties of the material also provide noise, vibration, and harshness benefits to the battery system by unitizing the battery module and absorbing external environmental impacts.

H.B. Fuller 1581 is a one-component, alcohol-cured RTV silicone sealant. A non-sag material with excellent heat resistance for use in industrial and electronics applications. 1581 has very good adhesion to a wide range of unprimed substrates. High performance with fast and excellent adhesion to glass, aluminum alloys, etc. It can be used for a variety of electronics bonding, encapsulation, and sealing applications. This material is certified by UL to pass HB flame rating testing. This material performs at temperatures ranging from -55°C to 210°C.

Tonsan® SN106FA is a silicone adhesive known for its medium viscosity, low elongation, and exceptional resistance to gear oil. It is specifically designed for the rigid joint surface sealing of transmission and timing chain covers, making it ideal for use in electric vehicles.

H.B. Fuller FH8801C is a fast-curing, single-component, electrically conductive adhesive designed for chip bonding in microelectronic, MEMS, and opto-electronic applications. This heat-curable material offers outstanding bond strength and snap cure during in-line production, making it ideal for automated assembly processes.

Hardman Epocap 45119-55119 is a two-part epoxy adhesive with a room-temperature cure. It is designed for general-purpose low-voltage applications. This epoxy is specifically formulated for use in electronics and electric motors. It serves as a reliable adhesive for bonding electronic components and facilitates the assembly of electric motors.

H.B. Fuller 1535 is a one-component, silicone adhesive sealant that cures on exposure to atmospheric moisture to form a silicone elastomer. This material is known for its excellent electrical properties, weather stability, chemical resistance, flame retardancy, and thermal conductivity. It exhibits good adhesion to most common building substrates, such as glass, metal, plastic, FR4, and lead frames.

Tonsan® 1583 is a high-quality silicone adhesive that offers exceptional electrical properties, outstanding weather stability, and remarkable chemical resistance. This adhesive is specifically formulated to meet the rigorous demands of sealing power battery packs, making it an ideal choice for applications in the electric vehicle industry.

Tonsan® TS820L is an anaerobic adhesive known for its low odor and exceptional shear and peel strength. It is specifically designed for structural bonding applications. This adhesive is suitable for bonding metals and ceramics quickly and with minimal surface preparation, making it an ideal choice for electric vehicle applications.

H.B. Fuller MP5401 is a one-component, heat-curable, thixotropic epoxy paste adhesive. It is a non-sag adhesive that forms strong bonds to metals and ceramics. H.B. Fuller MP5401 has exceptional thermal stability and resistance to water, humidity, and solvents. This product offers high heat resistance and cures in less than 36 seconds via induction or infrared heating. Its typical uses include permanent magnet motors and loudspeaker assembly, air conditioning joint tubes and processors, high-temperature structural bonding, filter end caps, and side seam assembly.