Products

H.B. Fuller RP1000 is a one-component, medium-viscosity, rapid-curing cyanoacrylate adhesive. It is designed to bond a wide range of similar and dissimilar materials effectively. With a fast handling strength of approximately 10 seconds, it provides quick results and is suitable for general-purpose bonding applications.

KALAR® 5281 is a partially cross-linked butyl rubber compound pelletized for easy handling. This product is modified with ethylene vinyl acetate (EVA) copolymer to improve lower temperature toughness and higher temperature processing. KALAR® products feature all the performance attributes expected of butyl rubber. KALAR® 5281 is light amber to yellow in color and is among the tightest cross-linked butyl rubbers of the KALAR® products. It is designed as the starting point for applications that require the maximum resistance to creep and slump.

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

EternaBond® FGT BC-1241 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

H.B. Fuller AT-1 very high-bond strength acrylic tape is a pressure-sensitive, water-clear, solid acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

H.B. Fuller MP55350 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55350 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. This adhesive offers maximum open time to align parts.

Swift®lock 2009 is a moisture-curing reactive hot melt adhesive based on PO. It is designed to form a very strong bond that is resistant to heat, cold, and moisture after final curing. This product is characterized by its stability of viscosity during application, ensuring consistent and reliable performance. Additionally, Swift®lock 2009 offers high green strength.

H.B. Fuller 1590 is a general oxime silicone RTV (Room Temperature Vulcanizing) sealant. It is commonly used for flange sealing on engines due to its high elongation, excellent chemical resistance, and resistance to aging. This silicone RTV is ideal for applications such as oil pan and ladder frame gaskets in powertrain systems. It can be used to create form-in-place and cure-in-place gaskets, providing reliable sealing properties.

Cyberbond CB AT 1740 PP-PE Bonder is a two-component methacrylate adhesive specifically designed for bonding polyethylene and polypropylene substrates without any pretreatment. It has a short open time, thixotropic consistency, and a mixing ratio of 10:1, making it easy to apply and providing excellent bonding performance.

H.B. Fuller FH8801 is a one-part acrylate adhesive that undergoes heat curing. It offers fast curing at low temperatures and provides outstanding bond strength. This adhesive is commonly used for chip bonding in microelectronic, MEMS, and opto-electronic applications. It is especially suitable for in-line production as it has the ability to snap cure. FH8801 is an ideal heat cure acrylic for chip bonding and other electronics applications, including electric motors.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

Thermonex® Clearbond 201-02A is a ready-to-use contact adhesive known for its exceptional substrate adhesion, high durability, excellent performance, heat resistance, and ease of processing. This adhesive is specifically designed to meet the needs of the automotive and transportation industries, with a strong emphasis on applications within automotive interiors.

KALENE® 1300 is a low-molecular-weight liquid polymer derived by the depolymerization of butyl rubber. It vulcanizes at either ambient or elevated temperatures with the standard curatives for butyl rubber. KALENE® 1300 is light gray and contains no solvents or additives. KALENE® 1300 has the higher viscosity of the two KALENE® grades available and is the ideal choice for applications requiring the maximum retention of physical properties at the expense of a maximum reduction in viscosity. KALENE® 1300 is the preferred liquid butyl rubber for adhesive applications and a reactive additive to ordinary butyl rubber. KALENE® 1300 provides gas impermeability, chemical resistance, moisture resistance, good electrical properties, and excellent vibration and sound damping qualities.