Products

Körapur® 128 S is an elastic one-component adhesive and sealant used for bonding in the manufacturing of containers, vehicles, vehicle bodywork, air conditioning and heating equipment, metalwork, and other applications. It exhibits good adhesion to primed and painted metals, aluminum and steel, wood, and duroplastics. It also offers good resistance to humidity and weathering.

Cilbond® 62W is a trusted and high-performance water-based one-coat friction system designed for compounds used in the Friction Industry. It is primarily used in the manufacturing of products like original equipment (OE) and after-market brake pads. It bonds to all metals commonly used in brake pad production, including Zn/Ni coatings.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

KALENE® 1300 is a low-molecular-weight liquid polymer derived by the depolymerization of butyl rubber. It vulcanizes at either ambient or elevated temperatures with the standard curatives for butyl rubber. KALENE® 1300 is light gray and contains no solvents or additives. KALENE® 1300 has the higher viscosity of the two KALENE® grades available and is the ideal choice for applications requiring the maximum retention of physical properties at the expense of a maximum reduction in viscosity. KALENE® 1300 is the preferred liquid butyl rubber for adhesive applications and a reactive additive to ordinary butyl rubber. KALENE® 1300 provides gas impermeability, chemical resistance, moisture resistance, good electrical properties, and excellent vibration and sound damping qualities.

Körapox BS 90 is an epoxy adhesive with reactive chemistry. It creates an anti-slip surface and offers good abrasion resistance. It contains silica sand for enhanced performance. It is commonly used in floor coatings, such as in refrigerated vehicles, specialty vehicles, busses, trucks, and commercial vehicles.

HydroArmor® 7720 is a latex coating that prevents water from wicking into boat flooring, bus flooring, and recreational vehicle walls. HydroArmor® 7720 can be brushed or rolled onto floor boards, the cut edges of floor boards, wall edges, and to window and wheel openings. The coating dries to form a waterproof seal that prevents moisture from wicking into the AB marine wood flooring, plywood, soft and hardwood, bead board, and the bond lines between the materials used in the construction of the RV walls.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.

Körapur® 128 is a self-leveling sealant known for its good humidity and weather resistance. It can be applied to roofs and is suitable for sealing purposes. This sealant is also overpaintable, allowing for further customization. It is commonly used in various applications, such as RVs, specialty vehicles, busses, trucks, and commercial vehicles, for effective roof sealing.

Körapox BS 85 is an epoxy adhesive with reactive chemistry. It creates an anti-slip surface and offers good abrasion resistance and UV resistance. It is commonly used in floor coatings, such as in refrigerated vehicles, specialty vehicles, busses, trucks, and commercial vehicles.

KALENE® 800 is a low-molecular-weight liquid polymer derived by the depolymerization of butyl rubber. It vulcanizes at either ambient or elevated temperatures with the standard curatives for butyl rubber. KALENE® 800 is light gray and contains no solvents or additives. KALENE® 800 has the lower viscosity of the two KALENE® grades available and is the preferred liquid butyl rubber for coating applications. KALENE® 800 provides gas impermeability, chemical resistance, moisture resistance, good electrical properties, and excellent vibration/sound damping qualities.