Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Benefits
Bright Blue Color Easy to spot with the naked eye. UV indicator and black light not required. Easy identification of low spots in the substrates to help avoid potential delaminations. Easy management of coating weight variations; cost savings.
Patented Fully Reactive Technology In addition to the many other benefits of this technology, bonded assemblies including darkly colored materials posses exceptional heat resistance.
Enhanced Adhesion Adheres to many lower surface tension substrates and higher density foam materials at temperatures.
Excellent Creep Resistance at High Temperatures Cured adhesive film is extremely tough yet flexible. This allows for differences in thermal expansion and contraction of various substrates without sacrificing bond performance.
Excellent Environmental Resistance Cures to form a very strong bond that is resistant to heat, cold, moisture, and many solvents.
Versatility Adheres to a wide variety of core stocks and skins.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Suggested Application
- Swift®lock 9053 was specifically formulated for use in the assembly of recreational vehicle subcomponents, including skins, composite walls, floors, ceilings and front caps. Substrates typically bonded include FRP, aluminum, lauan and other plywoods.
- Cutting edge technology allows 9053 to quickly build green strength while simultaneously delivering extended open time often necessary for assembling large and complex components. 9053 unique formulation also provides fiber tearing bonds very quickly, as well as providing deep foam tear at -20ºF, room temperature and 180ºF. It is blue in color and very visible, so the use of black lights or UV indicators is not required.
- Use Precautions
Product is ready-to-use as received; do not dilute hot melt adhesive. Confirm compatibility before making hot melt adhesive changes.
Properties
- Typical Properties
Value Units Test Method / Conditions Viscosity (at 250°F) 22,000 - 28000 cP - Open Time max. 7 min - Tensile Strength 1900 - 2100 psi - Elongation 450 - 550 % - 2% Secant Modulus 4100 - 4300 psi - Cure Rate (21 - 25°C, 45 - 55% relative humidity, 4h)* 75.0 % - - Note
* - dependent upon moisture and temperature
Packaging & Availability
Storage & Handling
- Storage Condition
To ensure maximum stability, product should be stored in the original closed container in an interior location capable of maintaining a constant temperature.