Products

Körapop 235 is a permanently elastic adhesive. It can also be used as a 2K version with accelerator paste for specific applications. This adhesive is primarily used for assembly bonding and interior finishing in various industries, such as trailer and commercial vehicle manufacturing.

H.B. Fuller Ipacoll™ PWC 3135 PB water-based adhesive that exhibits excellent adhesion on coated surfaces and foils. The product is specifically recommended for use on folding boxes, case sealings, as well as for window gluing in the packaging industry; especially used in the food industry as well as for deep freezing goods.

H.B. Fuller PD 2128 is a high-tack acrylic pressure-sensitive adhesive (PSA) suitable for a variety of applications, including insulation bonding, flexible circuits, and general bonding. This PSA offers excellent insulation properties, making it ideal for applications where high insulation is required. H.B. Fuller PD 2128 is a ready-to-use pressure-sensitive adhesive that provides strong bonding capabilities.

H.B. Fuller STP 1921 Modified Silane Sealant is a high-quality, neutral, elastic single-component adhesive/sealant based on silane-terminated polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture, these times can be reduced; low temperatures as well as low moisture retard the process.

H.B. Fuller EV Seal 901 BCF is a highly compressible PVC foam core encapsulated with high-tack butyl adhesive/sealant. This flexible material conforms readily to corners and irregular contours. It gives a secure seal that helps protect against water penetration and prevents corrosion and moisture damage.

Tonsan® MT3710 is a two-component anaerobic adhesive designed for room temperature curing. Its specialty lies in bonding motor silicon steel sheets. With medium viscosity, it rapidly cures at room temperature when used in conjunction with the MT3300 primer, resulting in high-strength bonds after curing. This adhesive is tailored to meet the specific performance demands of motor operation.

H.B. Fuller EV Bond 701 is a uniquely formulated thermoplastic that provides outstanding initial tack and green strength as well as long-term bond integrity. This hot-melt pressure-sensitive adhesive is ideal for bonding pouch to pouch cells, cylindrical cells to carriers, or prismatic to prismatic cells. H.B. Fuller EV Bond 701 can also be utilized in production to fixture contents until final construction is completed.

GorillaPro® EP5 is an excellent non-sag, general-purpose, two-component epoxy adhesive with an opaque white color. It sets quickly and is commonly used for sealing, gap filling, fixturing, and tacking in industrial and electrical applications. It forms strong bonds with materials such as aluminum, epoxy, glass, wood, and stone. The adhesive is thixotropic and sag resistant, and it comes in a convenient DOUBLE/BUBBLE® 4.5 gm packet.

Cyberbond 1326 is a reactive-chemistry, two-part acrylate adhesive with high strength and impact. It is used in automotive, electronics, and general assembly applications, as well as in the sporting goods and leisure industries. It is typically used with Cyberbond 1094.

Cyberbond CB AT 1735 is a two-component methyl methacrylate adhesive designed for bonding metals to various plastics and composites, including ABS, PC, PVC, PMMA, and Polyamide. This adhesive grade has a thixotropic consistency, long open time and is very flexible.

Cyberbond CB AL 6028 is a two-component methyl methacrylate adhesive. It is especially suited for bonding metals to different plastics and composites. This grade possesses high elasticity and elongation along with a short open time. The mechanical properties range from flexible to rigid.

Cyberbond CB AT 1760 is a two component methyl methacrylate adhesive. It is especially suited for bonding metals to different plastics (e.g. ABS, PC, PVC, PMMA, Polyamide) and composites. Cyberbond offers these adhesives in double cartridges in 1:1 or 10:1 ratio with static mixing tubes. This allows an easy and quick application.

Cyberbond CB AT 6065 is a flexible two component methyl methacrylate adhesive. It is especially suited for bonding metals to different plastics (e.g. ABS, PC, PVC, PMMA, Polyamide) and composites. Cyberbond offers these adhesives in double cartridges in 1:1 or 10:1 ratio with static mixing tubes. This allows an easy and quick application.

Cyberbond CB AL 6055 is a fast-setting, two-component adhesive made of methyl methacrylate. Its unique formula makes it particularly effective at bonding metals to different types of plastics and composites, including ABS, PC, PVC, PMMA, and Polyamide. This adhesive has a short open time, making it ideal for time-sensitive applications.

GorillaPro® NSNI anti-seize compounds are specifically used on threads, bolts, fasteners, flanges, and other clamped interfaces. They effectively prevent the threads or two metal surfaces from seizing and galling, allowing for easy disassembly. These compounds are designed to convert torque into tightening force more efficiently. They are formulated with a high solid content and a carrier grease. However, unlike regular grease, the solid lubricant in the anti-seize compound can withstand high temperatures and provide protection to parts even in extremely stressful environments.