H.B. Fuller SC1546

H.B. Fuller SC1546 is a versatile, fast-drying, brush-grade adhesive that forms tough, flexible bonds resistant to moisture, aging, aliphatic solvents, and oils. It is designed to bond a wide variety of materials, such as wood, leather, PVC, ABS, polystyrene, steel, and aluminum.

Product Type: 1K (1 component) Adhesive, Contact Adhesive, Solventborne Adhesive

Application Area: Appliances, Gaskets

Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Aluminum, Leather, Metal, Polystyrene (PS), Polyvinyl Chloride (PVC), Steel, Wood

Features: Fast Drying, Good Aging Behavior, Good Moisture Resistance, Good Solvent Resistance, Good Toughness, Highly Versatile, Oil Resistant, Water Resistant

Technical Data Sheet
Message our experts with questions
Robert Blackstone avatar

Robert Blackstone

Global Leader - Inside Sales

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
Features & Benefits
  • Fast drying
  • Tough flexible bonds
  • Resistant to moisture, aging, aliphatic solvents and oils
  • Excellent water resistance and solvent resistance
  • Excellent for bonding wood, leather, PVC, ABS, polystyrene, steel and aluminum

Applications & Uses

Application Area
Compatible Substrates & Surfaces
Cure Method
Application Instructions
  • Clean all surfaces thoroughly. Make sure the surfaces are free of any oil residue.
  • Apply a uniform coverage of adhesive to one surface.
  • While the adhesive is still semi-wet, combine the substrates with sufficient pressure to insure 100% contact.
  • Drying time is 1 to 10 minutes depending on application conditions. Agitate prior to use.
  • Clean Up Solvent - Acetone, MEK, Ethyl Acetate
  • Equipment Suggestions - Squeeze bottle, Extrusion equipment with manual control nozzle.
  • Coverage - 320 ft2/gal (based on 5 thousands of an inch wet film applied on one surface).


Physical Form
Soluble in
Physical Properties
ValueUnitsTest Method / Conditions
Solid Content31.0%-
Flash Point0.0°F-
Bonding RangeBond one way, semi - wet--
Rheological Properties
ValueUnitsTest Method / Conditions
Viscosity (at 77°F)3, 500cP-

Safety & Health


Vapor may ignite explosively and cause flash fire if they contact an ignition source. Vapors may settle in low-lying areas or travel long distances to an ignition source. Ensure industrial ventilation systems are on and functioning properly, or use sufficient general dilution ventilation to maintain vapor concentrations below recommended exposure limits. Keep away from heat, spark, or open flame, including pilot lights, lighters, or electric switches. Disconnect all gas or electrical appliances, e.g., furnaces, heaters, power tools, until all vapors have been cleared from the area. Static charges can accumulate during shipping, unloading, pouring, or conveying. Ground and bond container, receiving equipment and personnel before transferring material. Do not generate static sparks (such as by walking on carpet, etc.). Keep container closed during and after use. Empty container may contain vapors - do not cut, drill, grind or weld on or near this container.

Packaging & Availability

Regional Availability
  • Latin America
  • North America

Storage & Handling

Shelf Life
6 Months

The shelf life of this product is 6 (six) months when stored at 60-80 ºF in the original sealed container. If stored below 60 ºF, the product should be conditioned in its unopened container at room temperature for at least 24 hours before usage.