Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Work Instructions
- Add 3% - 8%(weight of adhesive) PK-006N to the adhesive and mix well. The mixture should be used up in less than 4- 6h;
- Spray the adhesive on a single side with a recommended coating weight of 30-60g/m'(wet);
- Dry for 1-5min according to the on-site temperature and humidity;
- Molding: the recommended molding temperature is 100- 120°C and the molding time is 30-60s;
- Curing time is about 48 hours at room temperature and humidity.
Properties
- Physical Form
- Appearance
- Light brown/red/blue uniform liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Solid Content | min. 35 | % | - |
Viscosity (at 25°C) | 20 - 100 | mPa.s | - |
Storage & Handling
- Shelf Life
- 3 Months
- Storage Conditions
- Keep protected from moisture. Store in a cool and dry condition between 5°C and 35°C.
- Tightly reseal container immediately after each use.