Enhanced TDS
Identification & Functionality
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Benefits
- < 1% VOC
- Odourless
- Non-corrosive
- Primerless adhesion on many substrates
- High performance mechanical properties
- Color stable and UV resistant
- Ecological advantages – free of isocyanates, solvents, halogens and acids
- Paintable
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Application Limitations
When bonding and sealing PMMA and polycarbonate, under tension, stress corrosion cracking may occur. In such cases MS1937 should not be utilized.
- Application Instructions
- The substrates must be clean, dry, free of oil and grease.
- Sausage is applied with the corresponding Hand or Air pressure pistols.
- In the case of compressed air application, a pressure of (0.2-0.4) MPa is required.
- After application, MS1937 can be smoothed with soapy water.
Properties
- Physical Form
- Technical Data
Value Units Test Method / Conditions Sag Resistance No sagging - - Specific Density approx. 1.45 g/cm³ - Skin Formation Time (at 23 ± 2°C, 50 ± 5% relative humidity) 5 - 20 min - Cure Rate (at 23±2°C, 50±5 % relative humidity) approx. 4 mm/24h - Hardness approx. 55 Shore A ISO 7619, GB/T531 Tensile Strength approx. 3.0 MPa ISO 37, GB/T528 Elongation (Break) approx. 200 % ISO 37, GB/T528 Application Temperature 5 - 40 °C - Operating Temperature -40 to 100 °C - Short Exposure 120 °C - Storage Temperature 8 - 28 °C - - Adhesion Information
MS1937 has been tested and found to have excellent adhesion to the following unprimed substrates: aluminum, acrylic-coated aluminum, brass, steel, stainless steel, glass, fiberglass, ABS, rigid PVC, polyester etc. By the manufacturing of plastics, external release agents are used; these agents have to be removed prior to use. Depending on the surface it can be necessary to roughen the surface or to use a primer as an adhesion promoter to provide optimum adhesion.
- Paintability Information
MS1937 may be over-painted, however due to the large number of paints and varnishes we strongly recommend a compatibility test before application. The drying time of alkyd resin based paints may increase.
Packaging & Availability
- Regional Availability
- Packaging Information
Cartridge 430g Sausage 400ml , 600ml
Storage & Handling
- Shelf Life
- 12 months