H.B. Fuller EA6062

H.B. Fuller EA6062 is a fast UV-cure adhesive with a high depth of cure. This product is very soft and flexible and has excellent adhesion and dimensional stability after dispensing. It can be used as a re-enterable form-in-place or cure-in-place gasket material. H.B. Fuller EA6062 has excellent compressibility, elastic recovery, and low compression set.

Product Type1K (1 component) Adhesive, Radiation Curable Adhesive

Application AreaCure In Place Gasket, Electronic Components, Form In Plastic Gaskets (FIPG), Gaskets

Compatible Substrates & SurfacesGlass, Metal, Plastics

Chemical FamilyAcrylics & Acrylates, Polyurethane Acrylate

FeaturesDimensional Stability, Exceptional UV Resistance, Fast Curing, Flexible, Good Adhesion, Good Elastic Recovery, Good Sagging Resistance, High Compressibility, Soft, UV Curable

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Features and Benefits
  • One component, requires no mixing
  • Fast curing
  • Good adhesion to glass, many plastics and many metals
  • Excellent flexibility
  • Excellent compressibility, elastic recovery, and low compression set
  • Excellent dimensional stability after dispensing
  • Excellent depth of cure

Applications & Uses

Compatible Substrates & Surfaces
Cure Method
Instruction for Use

1. Coating surface area should be clean and free of any fluxes, residues, dust or any other contaminants.

2. A UV lamp with a wavelength of 365nm is required. The UV light should be focused towards the coated surface.

3. Curing speed is determined by the intensity of UV radiation, the distance from the UV light source and the coating surface. The depth of coating material can also require additional cure time.

4. Immediately close the lid after use. A black hose must be used to dispense the adhesive.

5. This material should be stored away from sunlight, UV light and artificial light sources.

Properties

Physical Form
Appearance
Semi translucent liquid
Cured Mechanical Properties
ValueUnitsTest Method / Conditions
Hardness37.0ASTM D2240, Shore A
Technical Data
ValueUnitsTest Method / Conditions
Density1.05g/cm³
Lap Shear Strength (Polycarbonate - Polycarbonate, at 50% RH)3.0MPaASTM D1002
Cured Properties
ValueUnitsTest Method / Conditions
Cure Time (at 100 mW/cm²)30.0s
Optimum Wavelength365 - 405nm
Tack Free (at 100mW/cm², 365nm)max. 6s
Elongation at Break2.55%ASTM D638
Tensile Strength6.0MPaASTM D638
Rheological Properties
ValueUnitsTest Method / Conditions
Viscosity (25°C, CP52, 100 rpm)30550.0cP
Thixotropic Index3.7

Packaging & Availability

Regional Availability
  • Africa
  • Asia Pacific (Excluding Russia)
  • Europe (Excluding Russia)
  • India
  • Latin America
  • Middle East
  • North America

Storage & Handling

Shelf Life
12 Months
Storage Conditions

Product should be stored at temperature between 8℃ to 28℃ in the unopened container in a dry location.