Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
- Available in slip fit or press fit formulas
- Best choices for non-threaded, cylindrical applications
- Fills inner space between components
- Cures into a hard thermoset plastic that resists loosening
- Color coded for grab-and-go
- Better load transmission and performance
- Product Features
Reliable Retaining Compounds
Retaining compounds durably and reliably retain bearings, shafts, studs, and flanges. In general, the need to dismantle these joints is not required, and GorillaPro retaining compounds are designed for high strength to meet this requirement. They achieve uniform stress distribution throughout the joint, making it possible to withstand dynamic and static loads with equal ease.- Retaining compounds can fill small gaps within twomated assemblies which allows for less costly part designs
- Friction corrosion is avoided
- Replaces clamp rings, set screws, and snap rings, reducing annual maintenance spend
High-Performance MRO Solutions
Proactive maintenance can help prevent costly unplanned downtime. It’s a challenge keeping up with maintenance activities while keeping teams trained, equipment operating, and driving productivity. With a full complement of maintenance adhesives, repair epoxies, lubricants, and sealants, GorillaPro retaining compounds can repair and improve the reliability of almost any piece of equipment or machinery.- Product Attributes
- Multi Use: Best for retaining shafts, gears, pulleys, and cylindrical parts
- Slip-Fit: Allows for more relaxd machining tolerances in slip-fit applications
- Cost Saving: Replaces clamp rings, set screws, and snap rings
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application Instruction
Surfaces to be bonded should be clean, dry and free of grease. Product should be applied in enough quantity to fill all engaged threads or gap. The product performs best in thin bond gaps. Very large gaps may create voids that will affect the cure speed and overall strength. Good contact is essential. It is recommended to confirm compatibility of the product with all substrates prior to use. This product is not recommended for use with strong oxidizing materials. Where aqueous washing systems are used to clean the surfaces before bonding, these aqueous washes can affect the cure and performance of the adhesive. This product is not normally recommended for use on plastics, users must check compatibility of the product with such substrates.
Curing Performance
The rate of cure will depend on environmental conditions and the substrates used. The gap of the bond line will affect set speed. Smaller gaps tend to increase set speed. Activators may be applied to further improve set speed, but may also impair overall adhesive performance.
Properties
- Physical Form
- Physical Properties
- Cured Mechanical Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Technology/Base | Urethane Methacrylate | — | — |
| Type of Product | Adhesive and Sealant | — | — |
| Components | One Component | — | — |
| Curing | Anaerobic with Secondary Heat Cure | — | — |
| Consistency | Viscous Liquid | — | — |
| Viscosity (at 25°C) | 1500 - 2500 | cPs | Brookfield SC4-27 |
| Specific Gravity | 1.1 | — | — |
| Value | Units | Test Method / Conditions | |
| Locking Strength | High | — | — |
| Pin/Collar Shear Strength | min. 3500 | psi | ASTM D4562 |
| Service Temperature | -55. to 150 | °C | — |
| Value | Units | Test Method / Conditions | |
| Full Cure Conditions (at 25°C) | 24.0 | hours | — |
| Cure Appearance | Green Solid | — | — |
| Value | Units | Test Method / Conditions | |
| Flash Point | min. 93 | °C | — |
| Gap Fill | 0.015 | inch | — |
| Storage Condition | 20.0 | °C | — |
Technical Details & Test Data
- Test Data
Set Time On Various Substrates
Heating Aging
Aged at Temperature Indicated & Tested at 22°C
Hot Strength
%RT Strength, Tested at Temperature
Storage & Handling
- Shelf Life
- 12 months
- Storage Condition
Products should be stored unopened in a cool, dry place out of direct sunlight. Products may be refrigerated for improved shelf life, but should be brought back to room temperature before use.