Products

H.B. Fuller 35RC is a fast-curing, high-strength anaerobic adhesive. It is used for locking and sealing threads and for retaining cylindrical parts. It allows for larger machining tolerances and is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

RBUV213A is a single-component, low-viscosity anaerobic thread-locking adhesive with a UV-initiated surface cure component. It prevents the loosening and leaking of threaded fasteners and is ideal for preassembled components, where its low viscosity and capillary action allow it to wick into threaded assemblies. Additionally, RBUV213A can be used to fill porosity in welds and castings.

H.B. Fuller 22TL is a thixotropic anaerobic compound made of Polyacrylate that is specifically designed to cure rapidly and consistently on most fasteners in their original condition. These compounds offer dependable lubrication during assembly and can also act as a threadlocking adhesive and sealant.

H.B. Fuller 72TL is a high-strength anaerobic adhesive that has resistance to a very high temperature of 230°C. It is used for locking and sealing thread connections and fitted parts. Its high viscosity and thixotropic effect allow for larger tolerances. It is highly resistant to corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller 90TL has low viscosity and provides high capillary action for locking and sealing threaded fasteners and close-fitting parts after assembly. Additionally, it is also used to penetrate and seal metal porosity in molds and incastings. It provides medium- to high-strength locking and is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller 2536 is a two-component, room-temperature, fast-bonding silicone system. Its typical applications include glass, metal, and plastic bonding. It provides good long-term adhesion performance in high-temperature conditions. This black RTV-2 silicone is a de-alcoholized silicone with the advantages of fast curing, low odor, no solvent, no corrosion, excellent electric performance, and excellent resistance to all kinds of weather, including UV light, rainwater, hailstone impacting, etc. There is a secondary cure with atmospheric moisture that promotes full cure over 7 days.

H.B. Fuller 154 is a high-strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and the thixotropic effect allow for larger tolerances. Highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals. Refrigerant sealant, excellent solvent resistance, and for pipes up to 3 inches in diameter.

H.B. Fuller EX9801 is a two-component epoxy adhesive with reactive chemistry. It is known for its strong bonding strength, excellent water resistance, and corrosion resistance properties. This adhesive is commonly used for bonding composite materials, assembling wood angles, and in the manufacturing of window frames and fenestration products.

H.B. Fuller 80RC is a fast-curing, high-strength anaerobic adhesive. It is used for locking and sealing threads and for retaining cylindrical parts. It allows for larger machining tolerances and is highly resistant to heat, corrosion,vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller 145 is a one-component liquid sealant specifically designed for locking and sealing high-pressure fluid power systems. It is an anaerobic sealant that can be heat-cured as a secondary measure. This sealant has a controlled flow viscosity and will not cause filter contamination.

Cilbond® 36 is a one-coat rubber-to-metal bonding solution specifically designed for specialty elastomers, making it ideal for demanding and high-performance applications. It offers extreme corrosion protection and a long open time. Cilbond® 36 serves as a high-performance bonding agent for VMQ (silicone) to substrate, exhibits exceptional temperature performance, and features a one-coat formulation.

ElastiSeal® 6098 is a non-flowing sealant that is designed to waterproof and prevent corrosion in spot weld assemblies. This sealant permits welding with conventional spot welders. It prevents moisture and oxygen from entering the joint and provides corrosion protection to the area that cannot be coated with primer. The sealant disappears from the area of the weld but retains a tight seal around the weld spot. The weld strengths are unchanged by the use of ElastiSeal® 6098.

H.B. Fuller 77TL is a high-strength anaerobic adhesive that is used for locking and sealing thread connections and fitted parts. It has a high viscosity that allows for larger tolerances assembling. This product is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

WS-8072 Class B is a non-chromate corrosion inhibitive, light weight, fast curing polysulfide sealant. Two-part manganese cured polysulfide system with eco-friendly profile provides an effective barrier against the common causes of corrosion on aluminum and between dissimilar metals. AC-8072 B retains excellent performance characteristics at temperature excursions up to 360°F. Typical applications include sealing of fay surfaces of mating parts of aircraft structure to prevent corrosion and channeling leakage. WS-8072 Class B has outstanding retention of physical properties when exposed to aviation fuel and oils. It is a thixotropic paste with non-sag characteristics an able to be applied by an extrusion gun or with a spatula.

 

Childers® Chil-Brate™ CP-25 is a water-based, fire-retardant, fibrated, asphalt-emulsion, weather barrier coating designed for applications over insulations on above-ground installations that operate under moderate to high-temperature conditions. This coating is "breathing," allowing vapors under pressure to pass through it. Once dry, the film becomes tough and durable, offering protection against atmospheric corrosives, chemical liquids, and fumes.