Products

H.B. Fuller MP54110 is a two-part unfilled epoxy adhesive designed for bonding of metals, ceramics, and most plastics. This product gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. This product has better water and temperature resistance than standard 5-minute epoxy. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 30 - 60 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Cilbond® 80ET is a solvent-based rubber bonding agent topcoat known for its exceptional rubber-to-metal bonding properties. It bonds various general-purpose elastomers and offers versatility in bonding EPDM, HNBR, NBR, NR, ECO, and other elastomers. It is commonly used in rubber-to-metal bonding applications, including high-performance timing belts.

Cilbond R-7327 is a high-performance 1K adhesive suitable for a wide range of substrates including metals, plastics, natural rubber, styrene-butadiene rubber (SBR), ethylene acrylic rubber (AEM), ethylene propylene diene monomer (EPDM), and other elastomers and rubbers. This product features excellent resistance to salt spray, mineral oils, ethylene glycol, weak acids, and hot water. It also provides high fatigue resistance. The adhesive is available in liquid form and can be applied using various methods such as spray, brush, nozzle, dip coating, or roll coater.

Cilbond R-7035 is a high-performance, one-component, toluene-free adhesive for rubber-to-substrate bonding applications. This product is ideal for use in a variety of rubbers, including SBR, natural rubber, and chloroprene rubber, and is typically used for industrial applications such as bonding parts in automotive and equipment manufacturing. Cilbond R-7035 offers excellent bonding strength and superior performance in challenging conditions. It is ISO 9001 certified and provides a high level of durability and resistance to oils, fuels, and other harsh substances.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Cilbond® 62W is a trusted and high-performance water-based one-coat friction system designed for compounds used in the Friction Industry. It is primarily used in the manufacturing of products like original equipment (OE) and after-market brake pads. It bonds to all metals commonly used in brake pad production, including Zn/Ni coatings.

Cilbond® 24 is a one-coat rubber-to-metal adhesive designed for general-purpose elastomers. It provides superior performance compared to standard primer and topcoat solutions. This adhesive offers significant process improvements and delivers long-term end-use performance. One of the key advantages of Cilbond® 24 is its exceptional corrosion protection, which helps enhance the durability and longevity of bonded parts.

H.B. Fuller MP54190GR is a two-part adhesive that is easy to mix and cures at room temperature, making it suitable for bonding a variety of materials, including metals, glass, ceramics, and plastics. This medium-viscosity polyamide/epoxy adhesive is recommended for low-stress, high-impact, and high-peel strength bonding applications of dissimilar materials, offering superior thermal shock resistance, dimensional stability, and resistance to water, weather, and many chemicals. This adhesive system is designed for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment with a recommended 1A:1B volume mix ratio. Handle cure time is typically 16–24 hours at room temperature, but this can be accelerated with heat. It's worth noting that cooler temperatures will increase work and cure times, and substrate heat-up time should be taken into account.

Cilbond R-7159 is a specialty water-based, one-component bonding system designed for the friction industry, specifically formulated for roller coating applications. This product is a ready-to-use liquid with excellent properties, including high fatigue resistance, heat resistance, and resistance to water, oil, fuel, diesel, and salt spray. It is a solvent-free, lead-free product, ideal for bonding to metal substrates. Its water-based formula makes it an environmentally friendly choice for aftermarket brake pad applications in the automotive sector. Cilbond R-7159 is certified ISO 9001 and available for application via nozzle, spray, brush, or dip coating methods. Its outstanding performance in various conditions ensures superior bonding strength. Cilbond R-7159 is a high-performance, waterborne adhesive, offering excellent resistance to challenging environments.

Cilbond® 48 is a clear, single-component bonding agent designed for both cold and hot-cure applications (65-275°F/20-135°C) with castable polyurethane systems and injection-molded thermoplastic polyurethane (TPU) systems on metal and plastic substrates. It provides exceptional corrosion resistance and offers the advantage of fast drying. Cilbond® 48 can be used without the need for a pre-bake process and has been specifically developed for use in dynamic conditions where hydrolytic stability is crucial.

H.B. Fuller MP5405NS is a two-part unfilled epoxy adhesive that is designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material and has a thixotropic paste consistency to prevent running and sagging. This product has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Cilbond R-7300W is a high-performance, one-component, water-based adhesive designed for bonding rubber compounds to metal and plastic substrates. This product is ideal for industrial applications requiring heat resistance, glycol resistance, and high-performance bonding. Cilbond R-7300W is compatible with a wide range of rubber types, including SBR, natural rubber, nitrile rubber, EPDM, and more. Its excellent salt spray resistance and high-performance features make it suitable for use in harsh environments such as automotive engine components and industrial equipment. The product is available for spray, brush, nozzle, dip coating, and roll coater applications, and is ISO 9001 certified.