Products

Cor-Weld™ WB 6351 is an additive specifically designed for use in starch glue preparation systems. It is intended to promote maximum running speed on corrugators and contribute to improved board quality. This product is suitable for use with all standard starch glue preparation systems. Its primary use is to enhance the corrugating speed of starch glues in the corrugated industry.

Tuskbond HH550 - 500ml Aerosol is a high heat sprayable contact adhesive, with heat resistance over 105 ̊C. Developed to bond a wide variety of substrates, HH550 has a long open time and provides a fast and strong permanent bond with excellent heat resistance. The adhesive is Approved by the manufacturer for use with Hanex Solid Surfaces.

Hydra FAST-EN® DC-20852 is a specific type of water-based adhesive that is designed for bonding open-cell urethane foams. It is important to note that DC-20852 is only one component of a two-component adhesive system, and it requires the use of an activator known as DC-12239 (Part B).

Hydra FAST-EN® DC-13431 is a water-based adhesive designed for use in foam fabrication that can be sprayed or coated. Its primary purpose is to bond open-cell polyurethane foam to itself, and it can be used in a 2-part spray operation or as a wet laminating 1-part spray or coating adhesive.

Hydra FAST-EN® DC-12623 is a one-part sprayable contact adhesive that is designed to bond various porous surfaces, especially open-cell polyurethane foams. The system is low-cost, highly stable, user-friendly, and allows for quick mating of surfaces after adhesive application. Hydra FAST-EN® DC-12623 provides good bonds in lay-flat scenarios and can be used with higher-strength urethane foams. Sprayed materials can be wet-mated (for lay-flat) or dry-mated (for stress scenarios). The final bonds are soft and supple. Other applications where the use of solvent-based, flammable, and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

Cyberbond CB 2600 is a surface-insensitive cyanoacrylate. This product performs very well on most materials, including acidic surfaces such as wood, leather, cardboard, paper, etc. CB 2600 is a very low-viscosity product with very fast bonding and wicking properties. Cyanoacrylates are fast setting, one component and solvent-free adhesives. They are based on esters of cyanoacetic acid.

Cyberbond CB 1603 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The high viscosity allows certain gap-filling properties. It is fast-bonding and has a very high viscosity along with good aging properties.

Swift®tak 5625 is a water-based adhesive for paper straws. This solution delivers excellent water resistance and direct food contact compliance, giving consumers confidence in your product's performance. During production, the high wet tack and fast set speed deliver secure bonding, even at fast production speeds. The combination of quick drying and no-odor performance easily positions Swift®tak 5625 as the ideal choice for paper straws.

Swift®therm 8009 is a high performance, low application temperature hot melt, spine adhesive. It is suitable for single shot binding on automatic binding machines at high speeds and low application temperature (e.g. manufacture of catalogs, telephone directories and magazines). This product is also suitable for two-shot binding acting as the primer itself or with another dedicated grade

Emuldec® SA 146 is a water-based polymer, known as a styrene acrylic copolymer, developed to enhance the adhesion properties of urea formaldehyde resins. Its primary application is improving adhesion in the production of abrasives by securely bonding grids onto paper surfaces.

Swift®tak 5588 is a water-based dispersion adhesive that boasts a food safe formulation, making it suitable for use in the food industry. It provides high initial tack and very good processing properties, making it ideal for high-speed applications. Additionally, it can be detected using established UV-detection systems, simplifying quality control. It is recommended for nozzle application in folding boxes.

Swift®tak 5998HP is a water-based adhesive that offers clean machining capabilities and fast setting speeds, making it ideal for laminating applications. It can be used with treated polyethylene and polypropylene films, bonding them to paper substrates for reliable packaging solutions. Additionally, easy clean-up simplifies the manufacturing process.

Swift®therm 3054 is a hot melt adhesive with good adhesion to filter media, reduced shrinkage, and good flexibility. It has been developed for the manufacture of air filters as a pleat separator. Filter media is a suitable substrate for this product.

Swift®tak 5730 is a water-based adhesive designed for paper straw manufacturing. It has been s[ecifically developed for applications where good water resistance of the final bond is required. This adhesive boasts good water resistance and wet tack, making it suitable for use in moist environments. Its short open time allows for quick and efficient production processes, while excellent machinability further increases productivity.

Swift®tak 5921 is a water-based adhesive designed for difficult surface carton forming and sealing. The product runs well on non-contact extrusion systems that require an adhesive with a low viscosity. It contains UV dyes to assist operators monitoring glue usage.