Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Work Instructions
- Add 0.2-1.5% (weight of adhesive) PK-006H to the adhesive and mix well. The mixture should be used up at 15- 35°C in less than 4-6h;
- Spray the adhesive on a single side with a recommended coating weight of 40-60 g/m? (wet);
- Dry for 0-180s to allow solvent evaporation (drying time depends on the coating weight, on-site temperature and humidity);
- Mold to the substrate for 40-60s above 70°C;
- Curing time is about 48 hours at room temperature and humidity.
Properties
- Color
- Physical Form
- Appearance
- Light yellow uniform liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Solid Content | 41.5 - 43 | % | — |
Consistency (at 25°C) | 150 - 250 | mPa.s | — |
Storage & Handling
- Shelf Life
- 6 Months
- Storage Conditions
Keep protected from moisture. Store in a cool and dry conditionbetween 5-35℃. Tightly reseal container immediately after each use.