Products

H.B. Fuller Kodiguard is used to provide security, soundproofing, and media functionality for various applications. The product utilizes multi-component catalytic or single-part ultraviolet curing platforms to achieve its desired properties. One of the key features and benefits of H.B. Fuller Kodiguard is its ability to enhance security and provide soundproofing capabilities. Additionally, H.B. Fuller Kodiguard offers media functionality, which can include features like privacy films, solar control, or other specialized coatings that enhance the performance of laminated glass in specific applications. It is commonly used in the manufacturing of windows where security, soundproofing, and media functionality are desired.

H.B. Fuller GI9633 is a two-part methacrylate adhesive designed for structural bonding of metals, plastic, and composite materials without surface preparation. Combined at a 1:1 ratio, it has a working time of 20 to 40 minutes and achieves approximately 50% of ultimate strength in 3 hours at 23°C. This product has designed for use on large structures where a moderate open time is needed. In addition, this product provides a unique combination of excellent fatigue endurance, outstanding impact resistance, and super toughness.

Tonsan TS805 High Strength Structural Adhesive is a two components, room temperature curing, 1:1 mix ratio by volume, methacrylate adhesive system. Cured layer has high toughness and good resistance to peeling off. Fixture time is 30 minutes. With good thixotropic property. The product is suitable for bonding a variety of substrates with a minimum of surface preparation.

H.B. Fuller EV Bond 300 is a structural adhesive, designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

Tonsan TS828 is a 10:1 ratio two-component methacrylate structural bonding adhesive. It is suitable for bonding various materials including metals and composite materials. The adhesive has fast curing speed, high strength after curing. Fixture time is 8~10mins under room temperature.

H.B. Fuller EV Bond 383 is a thixotropic, toughened, two-component, ambient-curing epoxy adhesive. High impact resistance, moderate cure speeds, and good peel resistance characteristics make this system suitable for assembly or sealing of reinforced composite structures, metal bonding, or other applications where a toughened epoxy adhesive is required. This system contains dyes that fluoresce brightly with exposure to UV inspection lamps (black light).

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

U3325 is a high viscosity UV-curable adhesive known for its excellent bonding properties on a wide range of plastics. Its strength and flexibility make it particularly suitable for bonding dissimilar substrates. The thixotropic viscosity ensures minimal migration, making it ideal for applications where precise placement is essential.

MP-55310 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55310 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.

EY3804 is an epoxy resin known for its excellent performance in the composite field repair applications. It is considered a permanent solution, capable of withstanding service temperatures effectively. This epoxy resin exhibits exceptional performance in hot water immersion and offers excellent thermal properties.

U3342 is a medium viscosity UV-curable adhesive that bonds effectively to a wide range of plastics, glass, and ceramics. It is particularly effective on PMMA and polycarbonate, offering impact resistance on both similar and dissimilar substrates.

MP-55350 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55350 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. This adhesive offers maximum open time to align parts.

H.B. Fuller EV Bond 440 is a high performance two part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. EV Bond 440 greatly increases the reliability of finished assemblies, it’s ability to with stand extreme temperature fluctuation, and resistance to a wide range of chemicals and environmental conditions.

H.B. Fuller EV Therm 440 is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. EV Therm 440GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller 42223/52223 (DOUBLE/BUBBLE® A-85) urethane purple is a medium-hardness, highly flexible, two-component polyurethane system designed for use as an adhesive. It is used in casting and coating applications requiring rapid curing, high flexibility, high resilience, transparency, and resistance to breakdown or yellowing from exposure to UV light. H.B. Fuller 42223/52223 is nearly impervious to water exposure during the curing process, yet bonded substrates should be reasonably water-free before application. It exhibits high resistance to aqueous materials after cure. This product is suitable for sealing and bonding flexible substrates such as flexible conveyor belts, printing press rollers, rubberized fabrics, shoes, ski boots, and other sports equipment. It is also excellent for bonding refrigeration and AC equipment.

H.B. Fuller MP5401 is a one-component, heat-curable, thixotropic epoxy paste adhesive. It is a non-sag adhesive that forms strong bonds to metals and ceramics. H.B. Fuller MP5401 has exceptional thermal stability and resistance to water, humidity, and solvents. This product offers high heat resistance and cures in less than 36 seconds via induction or infrared heating. Its typical uses include permanent magnet motors and loudspeaker assembly, air conditioning joint tubes and processors, high-temperature structural bonding, filter end caps, and side seam assembly.

PVC TrimWelder™ Slow Cure is a medium-viscosity, solvent-free structural adhesive system that provides flexibility, toughness, and surface adhesion for bonding all forms of PVC to themselves, metals, or wood. Cured performance shows excellent adhesion and bond strength to nylons, polystyrene, fiberglass, reinforced plastics, stone, ceramics, and most plain and plated metal components. This material can withstand thermal cycling and shock loading between dissimilar materials. Slow Cure is ready to handle in 90 - 120 minutes.

H.B. Fuller MP5405NS is a two-part unfilled epoxy adhesive that is designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material and has a thixotropic paste consistency to prevent running and sagging. This product has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.