Products

H.B. Fuller MP5401 is a one-component, heat-curable, thixotropic epoxy paste adhesive. It is a non-sag adhesive that forms strong bonds to metals and ceramics. H.B. Fuller MP5401 has exceptional thermal stability and resistance to water, humidity, and solvents. This product offers high heat resistance and cures in less than 36 seconds via induction or infrared heating. Its typical uses include permanent magnet motors and loudspeaker assembly, air conditioning joint tubes and processors, high-temperature structural bonding, filter end caps, and side seam assembly.

H.B. Fuller EV Therm 440 is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. EV Therm 440GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller FH8801 is a one-part acrylate adhesive that undergoes heat curing. It offers fast curing at low temperatures and provides outstanding bond strength. This adhesive is commonly used for chip bonding in microelectronic, MEMS, and opto-electronic applications. It is especially suitable for in-line production as it has the ability to snap cure. FH8801 is an ideal heat cure acrylic for chip bonding and other electronics applications, including electric motors.

H.B. Fuller FH7011 is a 1K acrylate anaerobic adhesive specifically designed for metal structure bonding. This adhesive is a one-part acrylic anaerobic adhesive used for bonding ferrites to electro-plated materials in electric motors. Its main uses include structure bonding and serving as an anaerobic adhesive for electric motor bonding in portable devices and electric motors.

H.B. Fuller TS820 is a two-part, 1:1 mix ratio, toughened adhesive with less odor than most acrylic adhesives. TS820 Adhesive has excellent shear and peel strengths along with good impact resistance and durability. TS820 Adhesive quickly bonds most metals and ceramics with minimal surface preparation.

H.B. Fuller EV Seal 901 BCF is a highly compressible PVC foam core encapsulated with high-tack butyl adhesive/sealant. This flexible material conforms readily to corners and irregular contours. It gives a secure seal that helps protect against water penetration and prevents corrosion and moisture damage.

H.B. Fuller 2245 is an opaque, medium-viscosity, rubber-toughened ethyl cyanoacrylate adhesive. This product provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments. H.B. Fuller 2245 shows excellent strength and flexibility on a variety of substrates.

H.B. Fuller EA6039 is a reactive acrylic adhesive that bonds a wide variety of substrates, including glass, numerous plastics, and most metals. This product has demonstrated remarkable adhesion and flexibility. It is a non-sag, high-strength, and highly flexible adhesive that can be dispensed and jetted at high speeds. It finds application in stacking and corner bonding of electronic components, as well as bonding glass, plastics, and various metals. Additionally, it is commonly used in electric motors.

H.B. Fuller EV Therm 440 GB is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. It allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Bond 383 is a thixotropic, toughened, two-component, ambient-curing epoxy adhesive. High impact resistance, moderate cure speeds, and good peel resistance characteristics make this system suitable for assembly or sealing of reinforced composite structures, metal bonding, or other applications where a toughened epoxy adhesive is required. This system contains dyes that fluoresce brightly with exposure to UV inspection lamps (black light).

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

H.B. Fuller EV Bond 420 is a high-performance, two-part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. EV Bond 420 greatly increases the reliability of finished assemblies, its ability to withstand extreme temperature fluctuations, and its resistance to a wide range of chemicals and environmental conditions. EV Bond 420GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Seal 200 is an MS polymer system that can be used for 1K moisture curing or a 2K accelerated cure option. Fast skin-over and green strength at room temperature. The product shows superb mechanical properties and provides unparalleled levels of sealing and resistance. Suitable for adhesion to a wide range of substrates like plastics, metals, and composite materials.

H.B. Fuller FH8707HF is a black-colored epoxy-based adhesive designed for a wide range of applications in electronic components, printed circuit boards (PCBs), electric motors, and automotive electrical and electronic systems. This heat-curable adhesive offers excellent filling properties, high strength, and good electrical properties. It exhibits improved aging resistance, ensuring long-term durability.

H.B. Fuller 1956 is a high-quality, multi-purpose, sag-resistant, one-component polyurethane sealant. This material is condensation-cure material. It has high strength and vibration-damping properties. It is used for automobile manufacturing, the shipping industry, container manufacture, heating and ventilation systems, and a variety of maintenance and repair applications.