Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Processing
Processing temperature: +5°C to +35°C
Preparation:
- The adhesion on normal vehicle varnishes generally does not require the use of primer. It is advisable to carry out preliminary adhesion tests on the support. Specific guidance regarding the use of primers may be obtained by submitting substrate samples to our laboratories.
- The surfaces to be bonded must be clean, dry and free from dust and grease. It is necessary to apply Körasolv CL 17 and Körabond HG 17 on glass. Due to the diversity of substrates, preliminary tests are recommended.
- Avoid direct contact with isocyanate reactive substances, especially alcohol such as spirit, dilutions and cleaning compounds until the adhesive has attained full cure. This will prevent the adhesive from curing properly.
- By direct or indirect contact with some other organic products preliminary tests are recommended.
Cleaning:
Körasolv PU- Clean tools immediately after use.
- Once cured material can only be removed mechanically.
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Density 1.3 g/cm³ - Specific Volume Resistance min. 1 · 10¹⁰ Ω·cm Kö-test method 100262 - Technical Data
Value Units Test Method / Conditions Drive-Away-Times (cars, respectively without and with double-sided airbags) 4 - 6 h FMVSS 212/208 Tack Free Time 35.0 min DIN 50 014, NC 23/50-2 Electrical Volume Resistivity 10¹⁰ Ω.cm - - Cured Properties
Value Units Test Method / Conditions Curing to Depth (within first 24 h) 3 mm/day DIN 50014 Elongation at Break min. 500 % DIN EN ISO 527 Hardness 63 Shore A DIN ISO 7619-1 Skin Formation Time 35 min DIN 50014 Tensile Strength min. 7.5 mPa ISO 37, DIN 53504 - Processing Properties
Value Units Test Method / Conditions Processing Temperature 5 - 40 °C - Service Temperature - 40 to 100 °C - Short Term Temperature Resistance 140 °C - Storage Temperature 10 - 25 °C -
Technical Details & Test Data
- Processing Information
Suitable Substrates Glass Coated surfaces Various other substrates Consistency Non-sagging Spreadable Surface Requirements Dry Clean Free of grease Free of dust Surface Cleaning Körasolv" CL 17 Adhesion Promoter (non absorbing surface) Körabond HG 17 Application Equipment Sachet dispenser - Cleaner for Tools Körasolv® PU
- Avoid Contact with Isocyanate Reactive Substances Avoid direct contact with isocyanate reactive substances, especially alcohol such as spirit, dilutions, cleaning compounds and reaction or curing products of silane-modified polymers or silicones until the adhesive has attained full cure. This will prevent the adhesive from curing properly.
- Compatibility The adhesion on normal vehicle varnishes does not require the use of primer
- Bonding of Glass For bonding on glass surfaces it is necessary to use Körasolv® CL 17 and Körabond® HG 17.
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
600 ml sachet (carton à 20 pcs.)
Storage & Handling
- Shelf Life
- 12 Months
- Storage Condition
- Do not store at temperatures above 25°C, store in unopened container in a cool, dry place.
- Keep away from wet areas, direct sunlight and heat sources.
Precautions: When processing Körapur 177, avoid direct skin contact with the uncured material. Use of safety gloves is recommended.
Drive away information:
- Drive Away Time: 5 hours (23 °C and 50% relative humidity)
- On vehicles fitted with both driver & passenger airbags
- Vehicle glass weight below 35 kg. Glass weight above 35 kg contact technical department