H.B. Fuller EA6034

H.B. Fuller EA6034 is a one-component UV adhesive that cures quickly and is specifically designed for reinforcing Flexible Printed Circuit (FPC) applications. The adhesive dries to a non-tacky surface and offers excellent flexibility. Additionally, this adhesive is fast-curing and does not require mixing.

Product Type1K (1 component) Adhesive, Radiation Curable Adhesive

Application AreaElectronic Components, Printed Circuit Boards

Chemical FamilyAcrylics & Acrylates

FeaturesFast Curing, Flexible, Non-tacky surface, UV Curable

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Features and Benefits
  • One component, requires no mixing.
  • Fast curing.
  • Good flexible.

Applications & Uses

Instruction for Use

1. Coating surface area should be clean and free of any fluxes, residues, dust or any other contaminants.

2. A UV lamp with a wavelength of 365nm is required. The UV light should be focused towards the coated surface.

3. Curing speed is determined by the intensity of UV radiation, the distance from the UV light source and the coating surface. The depth of coating material can also require additional cure time.

4. Immediately close the lid after use. A black hose must be used to dispense the adhesive.

5. This material should be stored away from sunlight, UV light and artificial light sources.

Properties

Physical Form
Appearance
Clear liquid
Physical Properties of Cured Material
ValueUnitsTest Method / Conditions
Hardness (100 mW/cm², at 365 nm, 24s)55.0Shore D
Tensile Strength (at Break, 100 mW/cm², at 365 nm, 24s)19.7MPa
Elongation at Break (100 mW/cm², at 365 nm, 24s)53.4%
Lap Shear Strength (Polycarbonate - Polycarbonate, 100 mW/cm², at 365 nm, 24s)3.0MPa
Linear Shrinkage (100 mW/cm², at 365 nm, 24s)0.9%
Volumetric Shrinkage (100 mW/cm², at 365 nm, 24s)2.7%
Uncured Properties
ValueUnitsTest Method / Conditions
Viscosity (25°C, CP52, 100 rpm)11000.0cP
Density1.07g/cm³
Typical Cured Properties
ValueUnitsTest Method / Conditions
Tack Free Time (100 mW/cm², at 365 nm)max. 10s
Depth of Cure (100 mW/cm², at 365 nm, 24sec)7.0mm

Safety & Health

Health and Safety Precautions

Keep away from children's store.
This product is recommended to be used within a well-ventilated place.
If you accidentally touches the skin, immediately wash with soap and water.
If you accidentally touches the eyes, please rinse with plenty of water, and then seek medical attention.

Packaging & Availability

Regional Availability
  • Africa
  • Asia Pacific (Excluding Russia)
  • Europe (Excluding Russia)
  • India
  • Latin America
  • Middle East
  • North America

Storage & Handling

Shelf Life
12 Months
Storage Conditions

Product should be stored at temperature between 8℃ to 28℃ in the unopened container in a dry location.