Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Product Applications
- Lower temperatures than recommended can cause higher viscosity which result in reduced bond strength and reduced wetting.
- Depending on the construction of the equipment, a continuous heating above processing temperature can cause decomposition of the adhesive.
- Tank melters should use pro- tective gases with < 5 ppm humidity, only.
- Rakoll 4655 is moisture sensitive, therefore container must be kept closed.
- Once cured, the material can only be removed mechanically
- Appropriate cleaners are listed in the product properties table.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Application Temperature 130 -150 °C - - Technical Data
Value Units Test Method / Conditions Density 1.1 g/cm³ - Storage Temperature - 25 to 35 °C - Processing Temperature 120 - 150 °C - Viscosity (Anton Paar, 130 C, cone-plate) 22000 mPa·s - Softening Point 67 °C Ring+Ball Typical Curing Time (23°C, 50 % RH) 3 - 4 d - Ambient Temperature 18 - 25 °C - Substrate Temperature 18 - 25 °C - Relative Humidity 40 - 60 % - - Product Properties
Surface Requirements
- Dry
- Clean
- Free of grease
- Free of dust
- Free of oil
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 9 months
- Storage Condition
Rakoll 4655 should be used within the shelf life specified on the packaging. The storage stability ap- plies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).