Products

H.B. Fuller M6197 is a water-based, one-component acrylic emulsion pressure-sensitive adhesive. It offers exceptional peel strength and resistance to creep, making it highly reliable. This adhesive is resistant to plastizer migration and provides good resistance to oils, solvents, and water. It is ideal for various tape and foam pressure-sensitive bonding applications, including foam, sponge, vinyl film, glass, painted surfaces, fabric, wood, leather, thermoplastics, thermoset plastics, EPDM, rubbers, and composites.

Tuskbond Infusion 305 - 22L Canister is a sprayable adhesive developed for bonding foam to itself and to timber during the construction of foam plugs. The adhesive is quick to apply and fast drying so plugs can be built quickly. The adhesive is very tacky and can be used as a one or two way stick depending on the strength of bond required.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Swift®therm 2003NA is a fast-setting, polyurethane reactive hot melt adhesive used for industrial assembly and automotive interior applications. It will adhere to a variety of substrates and has a relatively short open time, making it ideal for manual attachments and small pieces.

Foster® 81-84NH Non-Halogenated Adhesive/Sealant is a two-component, high-strength thermosetting urethane adhesive that does not contain flammable solvents or halide-based components. This adhesive is specifically formulated for bonding various types of low-temperature insulation materials to each other as well as to metal and masonry substrates, including stainless steel.

Tuskbond Infusion 900 - 22L Canister is a super tacky spray adhesive developed for holding heavy and thick mats in place during resin infusion processes. The product is extremely tacky and maintains its tack for long periods of time, making the product perfect for larger areas or deep crevices in the mould. Tuskbond Infusion 900 has a web spray pattern which provides a cross linking effect over the fibres of the reinforcement.

Childers® CP-137 HF Protective Coating is a halogen-free, white, water-based adhesive and coating with a dense, creamy consistency designed for interior applications. It can be easily applied with a brush and creates a durable film on surfaces like canvas and glass cloths. This water-based coating is safe to use, as it does not harm plastic foams or other adhesives, and cleaning brushes and tools are straightforward with water.

Foster® Stic-Safe® Adhesive 85-15™ is a fast-setting synthetic elastomer adhesive tailored for affixing fibrous glass insulation (up to 6 lbs.) to sheet metal surfaces like galvanized steel or aluminum found in air-conditioning ducts, hot air ducts, and metal buildings. Foster® 85-15™ unique consistency facilitates quick and effortless brushing onto metal ducts and various other surfaces. Additionally, it serves as an effective adhesive for lap-sealing vapor barrier jackets.

Childers® CP-147 HVAC Duct Sealant is a cost effective, water-based sealant that meets UL 181B-M standards. It comes in a unique thixotropic consistency, making it suitable for easy application using various methods, such as brush, glove, trowel, or power extrusion.

Foster® 40-30C Protective Coating is a low-odor, fast-setting, water-based surfacing material intended for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. Its low viscosity makes it suitable for application with a wide range of spray equipment currently available on the market.

Foster® Vapor-Safe® Coating AF 30-80AF™ is a water-based, fire-resistant, flexible, high-solids vapor retarder finish suitable for various types of thermal insulation, including polystyrene foam. It can be applied to dry concrete and finished cement surfaces. This coating is specifically designed for use in high-humidity environments, providing resistance against mold, fungus, and mildew growth on its surface. It serves to safeguard the insulation system from the discoloration and deterioration caused by these factors.

Millennium Hurricane Force® Universal Sealer Extreme is a fast-setting, solvent-free, multi-use universal sealer that becomes waterproof within minutes of application. The formula is essentially VOC-free, making it approved for use in regulated markets such as California and OTC states. Millennium Hurricane Force® Universal Sealer Extreme is a two-component product that cures via a chemical cross-linking mechanism. Unlike one-part moisture-cure sealants, Universal Sealer Extreme will cure consistently and quickly throughout, rather than simply skinning over and remaining tacky on the inside.

Foster® C.I. Mastic® 60-26 is a resilient and durable asphalt cutback mastic with high solids content. It serves as an effective vapor retarder due to its low vapor permeance, making it an excellent surface coating for outdoor applications, particularly for low-temperature insulation.

Foster® Drion® Contact Cement 85-75 is a fast-setting, water-resistant adhesive for sealing the laps of vapor barrier jackets and is also used for bonding materials to a variety of surfaces in applications where immediate adhesion and high initial adhesive strength are required.

H.B. Fuller Seal-Kwik™ Mirror Edge Sealer is a safe, proven formula for protecting mirror edges against black edge.  When a mirror is cut or edged, the silver at the edge of the mirror becomes exposed to environmental contaminants such as humidity, salt air, perspiration from handling the mirror, contaminants from some cleaning solutions, or coolants from edging machines. This exposure can start oxidization or "black edge."