Products

Ready-to-Use Products

Browse Applications

Paints & Coatings

Construction Materials

Adhesives & Sealants

Cleaners

Other Ready-to-Use Products

71 Products in Ready-to-Use Products

SDSWith SDS

TDSWith TDS

ProSpec® High Strength Precision Grout

RTU Product Type:Grout
Application Area:Precast Columns, Anchor Bolts, Rolling Mills, Sole Plates, Dowel, Pulp And Paper Mills, Generators, Bridge Seat, Crane Rail, Transfer Lines
Features:High Flexural Strength, Good Load Bearing Properties, Water Resistant, Non-Metallic, Excellent Working Time, High Coverage, Salt Resistance, No Shrinkage, Non-Porous, Good Stain Resistance, Cost Effective, Good Fluidity, High Density, Excellent Flowability, Excellent Strength, Non Corrosive, Good Compressive Strength, Freeze/Thaw Stability, High Early Strength

ProSpec® High Strength Precision Grout is a ready-to-use, specially formulated grout that offers high strength and excellent flowability for precision applications.

ProSpec® Slab Bedding Grout

RTU Product Type:Grout
Application Area:Road, Pavements, Precast Concrete
Features:Non Corrosive, No Shrinkage, Good Compressive Strength

ProSpec® Slab Bedding Grout is a non-shrink, high compressive strength, non-metallic grout used for placing prefabricated concrete pavements.

ProSpec® Sure-Coat®

RTU Product Type:1K (1 component) Coating
Features:Durable, Water Resistant, Enhanced Damp Proofing, Low Permeability, Paintable, Moisture Resistant
Application Area:Tilt Up Concrete, Basement, Masonry, Brick, Below Grade Wall, Cast-In-Place Concrete, Precast Concrete
Compatible Substrates & Surfaces:Concrete, Masonry, Brick, Stone
Application Method:Brush, Spray, Trowel

ProSpec® Sure-Coat® is a single component, polymer-modified, portland cement-based, water-resistant coating for concrete and masonry. Designed to protect structures from moisture damage and dampness.

ProSpec® Premium Patch 200

RTU Product Type:Grout, Concrete Admixture
Application Area:Highway Repair, Parking Structures, Runway, Loading Docks, Freezer Rooms, Wastewater Treatment Facilities, Overlays, Bridge Deck, Warehouses
Features:High Tensile Strength, Alkali Resistant, Impact Modified, Excellent Strength, Non Corrosive, Wide Temperature Operating Range, Fast Setting, Fiberglass Reinforced, Improved Flexural Strength, Good Bonding Strength, High Early Strength, Good Adhesion, Magnesium Phosphate-Free, High Durability, High Performance

ProSpec® Premium Patch 200 is a rapid-setting, fiber-reinforced, high-strength cement mortar, polymer-modified for durable concrete repair and overlay applications.

Swift®prime 4160

RTU Product Type:Waterborne Coating, Primer, Solventborne Coating
Application Area:Decorative Foils, Woodwork, Furniture, Panels, Decorative Edges
Compatible Substrates & Surfaces:Composites, Wood, Foils, Acrylonitrile Butadiene Styrene (ABS)
Features:Heat Resistance
Chemical Family:Polyvinyl Chlorides (PVC)

Swift®prime 4160 is a solvent-based primer specifically designed for the adhesion promotion of ABS foils in the woodworking industry. This primer offers high heat resistance and is free from NEP and NMP. It is commonly used to enhance the adhesion of edge bands and foils, ensuring a reliable bond in decorative applications.

Millennium EPDM High-Tack Primer

RTU Product Type:Primer
Application Area:Roofing Substrates
Compatible Substrates & Surfaces:Wood, Metal, Concrete
Features:Tacky, Fast Drying, High Coverage, High Viscosity, High Durability, Improved Adhesion
Chemical Family:Ethylene-Propylene-Diene Copolymers (EPDM)

Millennium EPDM High-Tack Primer is a rubber polymer-based roofing primer. The high viscosity formulation promotes uniform coverage on both horizontal and vertical surfaces. It is used to prime EPDM roofing membrane to provide improved adhesion to the Millennium family of EPDM tapes, laminates, and sealants. Millennium EPDM High-Tack Primer is an excellent choice for priming concrete, OSB, plywood, and metal surfaces.

HydroArmor® 7720

RTU Product Type:Waterborne Coating, Latex, Waterborne Adhesive
Application Area:Recreational Vehicle Walls, Bus Flooring, Boat Flooring, Marine Applications
Compatible Substrates & Surfaces:Wood, Plywood
Features:Easy To Clean, Waterproofing
Application Method:Brush, Roll Coater

HydroArmor® 7720 is a latex coating that prevents water from wicking into boat flooring, bus flooring, and recreational vehicle walls. HydroArmor® 7720 can be brushed or rolled onto floor boards, the cut edges of floor boards, wall edges, and to window and wheel openings. The coating dries to form a waterproof seal that prevents moisture from wicking into the AB marine wood flooring, plywood, soft and hardwood, bead board, and the bond lines between the materials used in the construction of the RV walls.

Childers® CP-137 HF-AF Protective Coating

RTU Product Type:Waterborne Adhesive
Application Area:Pipes, Equipment, Duct Liner, Insulators
Application Method:Brush, Spray
Compatible Substrates & Surfaces:Polystyrene (PS), Brattice Cloth, Woven Fabric
Features:Microbe Resistant, Good Bonding Strength, Fungus Resistant, Mildew Resistant, Highly Versatile, Fire-Resistant, Water-based, Abrasion Resistant, Good Washability, Bacteria Resistant, Mold Resistance

Childers® CP-137 HF-AF Protective Coating is an interior-grade, halogen-free, white, water-based adhesive and coating with a dense, cream-like texture. This versatile product is designed to resist fungal growth (AF) and is easily applied with a brush. It creates a durable film on various surfaces, including canvas and glass cloths. As a water-based material, it is safe to use and won't harm plastic foams or other adhesives.

HydroArmor® 8800BL

RTU Product Type:Latex, Waterborne Coating
Application Area:Bus, Transportation Seal, Recreational Vehicles, Truck
Compatible Substrates & Surfaces:Metal, Composites, Fiberglass, Galvanized Steel, Stainless Steel, Aluminum, Wood
Features:Corrosion Resistant, High Efficiency, Long Shelf Life, Superior Aesthetics, Good Weather Stability, Water Resistant, Highly Flexible, Good Sagging Resistance, Cost Effective, Easy To Clean, Reduces Carbon Footprint
Chemical Family:Acrylics & Acrylates

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

Intrafol™ 1226

RTU Product Type:2K (2 component) Coating, Primer, Solventborne Coating
Application Area:Woodwork, Furniture, Panels, Decorative Edges
Compatible Substrates & Surfaces:Wood, Acrylonitrile Butadiene Styrene (ABS), Composites
Features:Good Machinability, Medium Viscosity, Good Paint Adhesion, Excellent Machinability

Intrafol™ 1226 is a solvent-based primer specifically formulated for ABS edges. It is free from NEP, NMP, toluene, and THF. This primer offers good machinability and provides a homogeneous application. It is primarily used for adhesion promotion in edgebands and foils within the woodworking industry.

Millennium Hurricane Force® Universal Sealer Extreme

RTU Product Type:2K (2 component) Adhesive, 2K (2 component) Coating, Reactive Adhesive, Sealer
Application Area:Pipes, Roofing Substrates
Compatible Substrates & Surfaces:Copper, Polyvinyl Chloride (PVC), Asphalt, Concrete, Metal, Steel
Features:Water Resistant, Excellent Performance, Corrosion Resistant, Self-Leveling, Excellent Toughness, Fast Setting, Excellent Leveling Properties, Excellent Flowability

Millennium Hurricane Force® Universal Sealer Extreme is a fast-setting, solvent-free, multi-use universal sealer that becomes waterproof within minutes of application. The formula is essentially VOC-free, making it approved for use in regulated markets such as California and OTC states. Millennium Hurricane Force® Universal Sealer Extreme is a two-component product that cures via a chemical cross-linking mechanism. Unlike one-part moisture-cure sealants, Universal Sealer Extreme will cure consistently and quickly throughout, rather than simply skinning over and remaining tacky on the inside.

UltraShield HY 17

RTU Product Type:Waterborne Coating, Hybrid Coating
Features:Excellent Crack Bridging Ability, High Durability, Excellent Toughness, Waterproofing, Low VOC, High Tensile Strength, UV Resistant, Good Weather Stability, Water-based, Water Resistant, Easy To Apply, Resilient, Moisture Resistant, Heat Resistance, Highly Flexible, Good Elongation, Chemical Resistant, Abrasion Resistant
Application Area:Shower, Patios, Terraces, Sandwich Panels, Roofs, Kitchen, Balconies
Compatible Substrates & Surfaces:Asbestos, Concrete, Aluminum, Metal
Chemical Family:Polyurethanes (PU)

UltraShield HY 17 is a premium quality, flexible, hybrid polyurethane-based waterproofing and protective coating ideal for roof, wet, and exposed surface applications. Upon full cure, it forms a tough, resilient, yet flexible coating. UltraShield HY 17 also provides chemical resistance against sulfates, chlorides, bacteria, oil, and common fuels.

Foster® Chil-Lock CP-240 Asbestos Removal Agent/Post Removal Sealer

RTU Product Type:Primer, Asbestos Remover , Sealer
Compatible Substrates & Surfaces:Steel, Metal
Features:Water-based
Application Method:Spray

Foster® Chil-Lock CP-240 Asbestos Removal Agent/Post Removal Sealer is an economical, fire-retardant, polymeric water-based asbestos removal agent and post-removal sealer. In its role as a post-removal sealer, it is specifically designed to mist, securely bind, and seal free asbestos fibers and any residual asbestos-containing material (ACM) remaining after removal. This highly effective solution firmly locks ACM onto cleaned, exposed surfaces and polyethylene sheeting within the containment area, preventing the release of loose fibers into the air.

UltraShield AC 10

RTU Product Type:Waterborne Coating, 1K (1 component) Coating, Anti-Carbonation Coating
Features:Good Weather Stability, Water-based, High Durability, Anti-Carbonation, Flexible, Excellent Toughness, Easy To Apply, Waterproofing, Non-Toxic, UV Resistant, Chemical Resistant
Application Area:Bridges, Tunnels, Underpasses, Parking Decks, Roofs, Balconies, Terraces
Compatible Substrates & Surfaces:Concrete
Chemical Family:Acrylics & Acrylates

UltraShield AC 10 is a single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

Tuskbond FC13 - 500ml Aerosol

RTU Product Type:Cleaner
Application Area:Upholstery, Carpets, Hard Surfaces
Application Substances:Dirt, Grime, Grease
Compatible Substrates & Surfaces:Painted Surfaces, Plastics, Glazed Surfaces, Metal
Features:High Performance, High Foaming, Easy To Apply, Water-based, Stain Removing, Non Stick

Tuskbond FC13 - 500ml Aerosol is a Foaming Carpet & Upholstery Cleaner. It is a water-based multi-purpose foaming cleaner, designed for removing stubborn stains such as grease, grime, dirt and nicotine. Safe for use on all hard and soft surfaces. The foaming action limits over application, leaving no sticky residue to cause re-soiling.

Show

of 71 results