Products

Weld Mount AT-6030 is a cutting-edge two-component structural adhesive featuring a 10:1 mix ratio. Unlock exceptional bonding prowess for metals, carbon fiber, composites, and plastics. Experience streamlined bonding—no priming required for most metals. Crafted with precision for the transportation sector, it ensures minimal read-through on display surfaces. With effortless surface prep, primerless metal bonding, and reduced read-through, AT-6030 excels in diverse assembly operations.

Cyberbond CB AT 1735 is a two-component methyl methacrylate adhesive designed for bonding metals to various plastics and composites, including ABS, PC, PVC, PMMA, and Polyamide. This adhesive grade has a thixotropic consistency, long open time and is very flexible.

H.B. Fuller 2240 is a high-viscosity, rubber-toughened ethyl cyanoacrylate adhesive. It provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments and displays excellent strength and flexibility on a variety of substrates. H.B. Fuller 2240 is tested to ISO 10993-5 for biocompatibility, making it suitable for use in medical applications.

Rakoll® 5010A is a polyurethane-based reactive hot melt adhesive. It belongs to the category of 2K liquid reactive adhesives and is ready for immediate use. This adhesive is known for its excellent flocking capabilities. Rakoll® 5010A is specifically tailored to meet the requirements of the automotive and transportation sectors, with a particular focus on applications within automotive interiors.

H.B. Fuller U305 is a UV-cured adhesive with medium or high viscosity. It provides high flexibility and excellent bonding on a wide range of substrates, particularly polycarbonate. Its uses include catheter assembly, IV sets, tube bonding, airway masks, mechanical device assembly, and balloon bonding in medical device assembly.

Weld Mount AT-880, a dynamic structural adhesive available in convenient cartridges. Engineered to bond with finesse, it aligns perfectly with aluminum, polycarbonate, ABS, and polypropylene. This acrylic-based adhesive assures steadfast bonds even with low-density polyethylene. Crafted for efficiency, it boasts short open times and room-temperature curing, optimizing your work process.

Cyberbond CB AT 6065 is a flexible two component methyl methacrylate adhesive. It is especially suited for bonding metals to different plastics (e.g. ABS, PC, PVC, PMMA, Polyamide) and composites. Cyberbond offers these adhesives in double cartridges in 1:1 or 10:1 ratio with static mixing tubes. This allows an easy and quick application.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

EternaBond® TP 13829 is a film-forming thermoplastic polyurethane adhesive. It is designed to bond with low-surface-energy plastics and materials that are sensitive to heat. The adhesive offers easy handling and excellent wetting capabilities. It is suitable for use with low-denier wovens and smooth-surface plastics such as nylon, PVC, polycarbonate, ABS, polyurethane, and fiberglass.

Cyberbond CB AL 6070 is a two-component methacrylate adhesive that is particularly suitable for bonding metals to various plastics and composites, including ABS, PC, PVC, PMMA, and Polyamide. It has a low odor and a short open time, making it easy to use.

EternaBond® TP 13218 is a thermoplastic polyurethane adhesive known for its versatility in bonding various materials. It is specifically designed for bonding textiles to textiles as well as textiles to hard surfaces. This adhesive is suitable for use with various textiles, PU/vinyl coatings, leather, fiberglass, polycarbonate, and ABS.

Weld Mount AT-2010 is a high-performance two-part methacrylate adhesive crafted to bond an array of plastics, metals, and composites. Unveil exceptional bond strength, enduring durability, and remarkable impact and weathering resistance. With a swift fixture time, it's a production favorite. AT-2010 elevates assembly reliability withstanding extreme temperature fluctuations, thermal cycling, and diverse chemicals.

H.B. Fuller U3334 is a high-viscosity UV-curable adhesive designed to bond well on a variety of substrates. It shows particular effectiveness on polycarbonate, glass, and PET/PETG. Its high elongation and flexibility make it well-suited for applications requiring vibration or impact resistance.

H.B. Fuller 2611 is a fast-setting, low- to medium-viscosity cyanoacrylate adhesive for use on all types of substrates. It is particularly suitable for setting and adhering rapidly to inactive surfaces such as wood, leather, and fiberglass matting. H.B. Fuller 2611 offers viscosity and flow characteristics ideal for filling small gaps. H.B. Fuller 2611 is certified to ISO 10993-5 for biocompatibility, making it suitable for use in medical applications.