Products

Swift®col 9724 is a solvent-borne pressure-sensitive adhesive based on synthetic polymers. It creates a very soft, odorless, flexible, and transparent dry film. The adhesive is resistant to aging and offers a good balance between adhesion and cohesion, with medium tack.

H.B. Fuller® HL-3363 is a hot-melt adhesive that provides superior adhesion and low viscosity for bookbinding and other adhesive applications. It is compatible with paper substrates, offering excellent bond strength and clean machining. This product is designed for use in the printing and packaging industry, particularly for applications like side gluing and joint/hinge gluing. HL-3363 is also effective for pressure-sensitive applications and offers excellent performance in a range of environments.

H.B. Fuller STP 1921 Modified Silane Sealant is a high-quality, neutral, elastic single-component adhesive/sealant based on silane-terminated polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture, these times can be reduced; low temperatures as well as low moisture retard the process.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

Swift®tak 5996 is a waterborne laminating adhesive, providing good adhesion and low foaming. Ideal for paper lamination and food packaging, it offers excellent bonding properties. This adhesive can be applied using gravure coating or roller methods, ensuring reliable performance in a variety of packaging applications.

ZKLT PK-6400S is a solvent-based polyurethane adhesive, forms strong adhesion through moisture reaction with the air. This adhesive is primarily used in the wet process of headliner assembly, bonding PU parts and fabrics, as well as materials like hemp felt board, non-woven fabric, felt, and foam. Notably, it's environmentally friendly, a 2K moisture-curing adhesive with a long pot life and low molding temperature.

Advantra® LT 8310 is a high-performance adhesive formulated to deliver strong and reliable bonds across a wide range of industrial applications. It is particularly effective in automotive and electronics industries, where exceptional adhesion strength and durability are required. This adhesive ensures long-lasting bonding performance, even in harsh environments, making it a reliable choice for critical bonding tasks.

H.B. Fuller MP5405NS is a two-part unfilled epoxy adhesive that is designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material and has a thixotropic paste consistency to prevent running and sagging. This product has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Hydra FAST-EN® Bond Plus® 20277 is a water-borne, fugitive adhesive with a low viscosity and high solids formulation for pattern and extrusion applications. Specially formulated for fast drying and clean machining, it has excellent lay-flat, even on lightweight stock. This product boasts non-blocking, unsurpassed humidity resistance, along with excellent adhesion to rag stocks.

Adecol® CQ-7500 is a permanent tack adhesive, based on block copolymers and synthetic tackfier resins. The ADECOL® CQ-7500 adhesive has high thermal stability, excellent oxidation resistance non-carbonizing and/or changing its adhesive properties while maintaining the high relation between adhesion forces and cohesion, has good adhesion in several types of substrates.

Clarity® PHL4150 is a high-performance, pressure-sensitive, hot melt adhesive designed for hard-to-bond substrates and demanding labeling applications, such as cold or wet containers and very fast lines. It has been formulated to give the greatest freedom to deliver design innovation, to accelerate production, and to differentiate brands with impressive performance in use.

Adecol® CQ-4443 adhesive is based on thermoplastic polymers and modified natural resins, is additively formulated with thermal resistance-promoting agents, and is free of loads and heavy metals. It is a rod-shaped thermoplastic that is suitable for use in handguns.It has rapid melting at application temperatures, excellent adhesion to various paper types, and good resistance to -18°C.

Adcotherm HMC-1 is a specialized blend of select polymers formulated specifically for use in door and deck lid weatherstrips. This sealant is known for its homogeneity and complete moisture resistance. It exhibits strong adhesion to rubber weatherstrips and basecoat and clearcoat paint systems, showcasing excellent heat aging resistance and long-term weathering. It also offers low insertion forces within a range of temperatures and remains static within the weather strip during shipping and handling.

H.B. Fuller FH8626 is a one-component, low-temperature-curing epoxy adhesive. This material features fast curing at low temperatures, low shrinkage, high adhesive strength, and adhesion to a variety of substrates. FH8626 will cure faster with increased temperature and has a low modulus to prevent warpage.

Swift®therm 8992 is a new hot melt adhesive crafted from high-quality raw materials and advanced production processes. It is specially formulated for paper bag handle-making applications, suitable for both flat paper handles and twisted paper handles. Swift®therm 8992 ensures smooth operation on stand-alone as well as high-speed machines, making it ideal for efficient production processes.