Cilbond® 70W

Identification

GBU

EA

RTU Product Type

Top Coat,

1K (1 component) Adhesive,

Waterborne Adhesive

Categories

Markets → Automotive & Transportation → Applications → Bonding & Assembly → Transportation Assembly

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Industrial Adhesives & Sealants

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 1K Liquid Reactive Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Water-Based Adhesives

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Top Coats

Application Information

Cure Method

Heat Cure

Applications

Application Area

Electric Vehicle (EV),

Industrial Assembly,

Automotive Applications,

Transportation Application

Application Method

Dip Coating,

Brush,

Spray,

Roll Coater

Compatible Polymers & Resins

Ethylene Propylene Diene Monomer (EPDM),

Isoprene Rubber (IR),

Natural Rubbers (NR),

Nitrile Butadiene Rubber (NBR),

Styrene Butadiene Rubber (SBR),

Thermoplastic Polyurethane (TPU),

Chloroprene Rubber (CR),

Chlorosulphonated Polyethylene Rubber (CSM),

Butyl Rubber (IIR),

Butadiene Rubber (BR),

Carboxylated Nitrile Butadiene Rubber (XNBR)

Compatible Substrates & Surfaces

Metal,

Polyphenylene Sulfide (PPS),

Fabrics

Applications & Uses

Application Guidelines

• Cilbond 70W must be stirred well before use
• Preferably high speed propellor or paddle type agitator.

Cleaning Information

• Clean tools immediately after use.
• Once cured, the material can only be removed mechanically.
• Cleaner for Tools - Water

Preparation Information

• For most substrates pretreatment is necessary to achieve good adhesion.
• Surface Requirements - Free of rust, Grit blasted or other approved surface treatments, Clean, Free of grease, Free of dust, Free of oil

Processing Information

• Suitable Elastomers - Natural rubber (NR), Styrene butadiene rubber (SBR), Chloroprene Rubber (CR), Polybutadiene (BR), Synthetic polyisoprene rubber (IR), Chlorosulphonated polyethylene (CSM / ACSM), Carboxylated NBR (XNBR), HNBR, IIR, EPDM, NBR
• Suitable Substrates - Various surface treated metals, Glass fibre reinforced plastic (GFRP), Fabrics, Various metals, Polyamide (PA), Polyester (PES), Various other substrates

Features

Ready-to-Use Product Features

Excellent Fuel Resistance,

Excellent Water Resistance,

Grease Resistant,

Heat Resistance,

High Glycol Resistance,

Low Temperature Resistant,

Oil Resistant,

Steam Resistant,

Very Good Heat Resistance,

Improved Water Immersion,

Pre-bake Resistance,

Easy To Apply,

Excellent Adherence,

Boil Water Resistance,

Good Hot Oil Resistant,

Hydraulic Fuel Resistance,

Excellent Dynamic Fatigue Resistance,

Excellent Static Fatigue Resistance

Features & Benefits

Product Benefits

• Excellent resistance against salt-spray, water immersion, boiling water, steam up to 130 °C, hot oils, fuels, glycols and hydraulic fuels up to 180°C
• Resistant to various chemicals, such as petrol, oils, greases
• Excellent static and dynamic fatigue resistance
• Easy application
• Minimal mould fouling
• Excellent pre-bake resistance
• Coated parts can be swaged
• Excellent heat resistance
• Excellent low temperature resistance

Packaging & Availability

Regional Availability

• Global

Physical Properties

Physical Form

Liquid

Appearance

Black liquid

Storage & Handling

Storage Information

• Cilbond 70W should be used within the shelf life  specified on the packaging.
• The storage stability ap- plies to material stored under appropriate conditions  only (original unopened containers, recommended storage temperature).