Electrical & Electronics

H.B. Fuller EA6110 is a double-cure adhesive that cures rapidly under UV light or ambient temperature and humidity. It is a no-flow adhesive that is specifically formulated for bonding plastics and metals, and can even cure in shadowed areas. It is ideal for applications that require fast curing times and excellent bonding properties.

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

H.B. Fuller FH8014 is a reworkable, single-component epoxy underfill for fine-pitch chip scale packaging (CSP) and wafer-level packaging (WLCSP) assembly. It is heat curable and designed to improve reliability, with a fast cure time at a moderate temperature to minimize stress on components. This underfill is also reworkable without causing damage to the attach pad.

H.B. Fuller TL 0587 is a two-component polyurethane potting material with excellent flexibility, suitable for general potting/encapsulation and electric vehicles. It belongs to the polyurethane (PU) chemical family and is a 2K reactive adhesive and encapsulant. H.B. Fuller TL 0587 is categorized under bonding technology and potting compounds within adhesives and sealants technologies.

H.B. Fuller EV Therm 440 GB is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. It allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller 2532 is a two-component addition type thermal conductive potting material with room temperature and heating fast cure silicone system. This material has excellent conductivity insulation, flame retardancy, weather resistance, and high temperature resistance. H.B. Fuller 2532 is formulated to function as a bonding, sealing, and encapsulating material for electronic components. This material performs at temperatures ranging from -60°C to 210°C.

H.B. Fuller EA6204 is a one-component, ultraviolet light-curable adhesive designed for LCD end-sealing applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

H.B. Fuller NP2075VF149 is a reactive hot melt adhesive known for its high performance and high green strength. As a one-component adhesive, it enables efficient manufacturing processes with high speed and low work-in-progress (WIP). It demonstrates excellent thermal stability during the production phase and boasts industry-leading heat resistance when exposed to in-lamp heat. This adhesive is primarily used for headlamp lens and housing bonding and exterior lighting applications.

H.B. Fuller EV Seal 200 is an MS polymer system that can be used for 1K moisture curing or a 2K accelerated cure option. Fast skin-over and green strength at room temperature. The product shows superb mechanical properties and provides unparalleled levels of sealing and resistance. Suitable for adhesion to a wide range of substrates like plastics, metals, and composite materials.

H.B. Fuller 20277 is a one-component, water-based fugitive adhesive and coating material designed for fast drying, clean machining, non-blocking, and excellent lay-flat and humidity resistance. It is suitable for spray, pattern, and extrusion applications and can be used to protect metals, fiberglass, contoured sheets, and other surfaces from weathering and discoloration during transportation.

H.B. Fuller EA6056 is a fast UV-cure adhesive designed for waterproof applications. It is a very soft material when cured. This product has shown excellent adhesion and is flexible. It can be used to replace a silicone ring for buffering and waterproof applications.

H.B. Fuller FH8626 is a one-component, low-temperature-curing epoxy adhesive. This material features fast curing at low temperatures, low shrinkage, high adhesive strength, and adhesion to a variety of substrates. FH8626 will cure faster with increased temperature and has a low modulus to prevent warpage.

H.B. Fuller FS3000 is a one-component silicone adhesive designed for conformal coating applications, particularly for circuit board protection. One of the key advantages of the H.B. Fuller FS3000 is its good dielectric properties. This means that it provides effective electrical insulation, preventing the flow of current between components and ensuring proper circuit functionality. By utilizing H.B. Fuller FS3000 for conformal coating in circuit board protection, manufacturers can benefit from its good dielectric properties and corrosion-free characteristics.

ISOLENE® 400-S is a low-molecular-weight liquid polymer derived from synthetic polyisoprene rubber. It offers the performance and processing characteristics of natural rubber with the added benefit of a lighter color and none of the natural impurities inherent in natural rubber products. ISOLENE® 400-S is a high-viscosity liquid at room temperature. It is a translucent, honey-colored liquid in bulk form and virtually clear in a thin film.