Wood Flooring

HydroArmor® 7720 is a latex coating that prevents water from wicking into boat flooring, bus flooring, and recreational vehicle walls. HydroArmor® 7720 can be brushed or rolled onto floor boards, the cut edges of floor boards, wall edges, and to window and wheel openings. The coating dries to form a waterproof seal that prevents moisture from wicking into the AB marine wood flooring, plywood, soft and hardwood, bead board, and the bond lines between the materials used in the construction of the RV walls.

TEC® Wood Endure™ Advanced Performance Wood Flooring Adhesive TA-806 is a groundbreaking wood flooring adhesive that doesn't require pre-installation moisture testing. Wood Endure™ can bridge cracks up to 1/8" and is environmentally friendly. It's easy to trowel and suitable for green building projects. It can be used for engineered, solid, or acrylic impregnated wood flooring, bamboo flooring, and is designed for glue-down installations. When used as an adhesive and moisture barrier, Wood Endure™ reduces moisture to acceptable levels.

Rakoll® GXL 3 is an easy-to-apply adhesive that is suitable for many processing conditions and provides very strong bonding. As a PVAc adhesive, it meets the requirements of class D3 as a one-component product. When mixed with Rakoll® GXL-3-Härter, it meets the requirements for the D4 standard DIN EN 204.

Körapur® 140 is a single-component, elastic, moisture-curing polyurethane adhesive used for bonding and sealing primered and varnished metals, aluminum, wooden materials, and duroplastics. This high-strength, elastic adhesive has excellent properties such as high cold resistance, high heat resistance, excellent moisture resistance, and excellent weather resistance.

H.B. Fuller UR2165 is a reactive-chemistry, two-part urethane adhesive. It can be sanded in 10 minutes and passes bending, nailing, flexing, and shaping tests. H.B. Fuller UR2165 is often used for knot filling in engineered wood flooring and parquet applications.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Rakoll® 4933 is an adhesive that provides strong and reliable bonding while contributing to lower hazardous emissions. H.B. Fuller recognizes the increasing importance of sustainability and the need for stricter certification of manufactured woodworking materials. Rakoll 4933 has been specifically designed to meet the toughest emission regulations, ensuring compliance both now and in the future.

Rapidex® 4001-149 is a high-quality polyurethane hot melt adhesive known for its excellent green strength, aggressive hot tack, and good coater stability. It is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Swift®tak PA368 is a water-based synthetic resin adhesive specifically formulated for use in hot, cold, or RF (radio frequency) press applications. It offers fast-setting properties, allowing for a press time of just 30 minutes. Additionally, it has a closed assembly time of up to 15 minutes. This adhesive is well-suited for engineered wood flooring manufacturing and is ideal for bonding engineered wood flooring and parquet.

Swift®hardener 49190 is a water-based, two-component polyurethane crosslinker. It is designed to be blended with adhesives to enhance their heat- and water-resistance properties. When added to Swift®tak 9965 adhesive at a recommended ratio of 10–15%, it improves the overall performance of the adhesive. Swift®hardener 49190 is commonly used in applications such as vinyl and paper continuous panel lamination, engineered wood flooring manufacturing, and panel lamination for flooring production.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

H.B. Fuller HM1597 is a versatile adhesive designed for various applications. It is compatible with composite substrates, making it suitable for a wide range of uses. In the building and construction industry, it finds its application in wood flooring, providing excellent adhesion to ensure durable and reliable bonding. Additionally, in the healthcare and pharmaceutical sectors, it is utilized in disposable nonwovens and disposable ware applications.

Rapidex® 2075 LT is a reactive hot melt adhesive known for its exceptional initial strength and is particularly suitable for tensioned substrates. It is widely used in panel lamination and wrapping of decorative surfaces, as well as in furniture components, doors, and flooring manufacturing.

Swift®tak 9965 is a water-based synthetic resin known for its excellent water and heat resistance. It offers reliable bond performance across a broad temperature range and meets the ANSI/HPVA EF 2012 standard. This adhesive is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.