Products

PVC TrimWelder™ Fast Cure is a medium-viscosity, solvent-free structural adhesive system that provides flexibility, toughness, and surface adhesion for bonding all forms of PVC to themselves, metals, or wood. Cured performance shows excellent adhesion and bond strength to nylons, polystyrene, fiberglass, reinforced plastics, stone, ceramics, and most plain and plated metal components. This material can withstand thermal cycling and shock loading between dissimilar materials. Fast Cure is ready for handling in 10 to 30 minutes.

PVC TrimWelder™ White Hot is a solvent based adhesive designed specifically for use in joining PVC (Poly Vinyl Chloride) plastic to itself. PVC TrimWelder™ White Hot™ is a fast acting, high strength adhesive. It is a solvated system with tetrahydrofuran, cyclohexanone and methyl ethyl ketone.

Millennium PG-1 Pump Grade (Low Viscosity Insulation) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. The application process is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart* (by Garlock) or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Millennium One Step Green® Foamable Adhesive is an exciting, new, patented*, essentially VOC-free, all-weather insulation adhesive manufactured with an industry-leading 45%** rapidly renewable material content. Millennium One Step Green® Foamable Adhesive carries all of the equivalent FM approvals of our highly popular One Step Foamable Adhesive® and is designed for use with our One StepTM application process. Our One Step™ application process eliminates errors due to poor mixing. The application process is quick and easy, resulting in significant labor savings for the contractor. No expensive, high-maintenance specialty pumps or spray rigs are required.

Foster® Bridging Mastic Encapsulant-Lockdown 32-80™ is a dual-purpose coating designed for asbestos abatement. It is field-proven and, upon curing, forms a tough, light-colored, washable, abrasion-resistant elastomeric coating. This coating effectively reduces the release of asbestos fibers from both conventional and spray-applied asbestos-containing materials (ACM). When used with glass cloth, Foster® Bridging Mastic Encapsulant-Lockdown 32-80™ is ideal for covering interior pipe insulation and boiler lagging.

Foster® Bridging Encapsulant 32-32 is a single-component, water-based elastomeric product with pigmentation. It is designed for interior use over asbestos-containing materials (ACM) of fibrous and cementitious types. This product can be easily applied via spray, and once cured, it forms a resilient, durable elastomeric film over the ACM. This film effectively delays the release of friable asbestos fibers.

Foster® Chil-Bridge™ CP-211 is a polymeric, water-based coating designed for the protection and isolation of asbestos-containing materials (ACM). It is suitable for use in both indoor and outdoor applications. When applied over various forms of ACM, it effectively bridges, encases, and seals friable asbestos fibers.

PVC TrimWelder™ Slow Cure is a medium-viscosity, solvent-free structural adhesive system that provides flexibility, toughness, and surface adhesion for bonding all forms of PVC to themselves, metals, or wood. Cured performance shows excellent adhesion and bond strength to nylons, polystyrene, fiberglass, reinforced plastics, stone, ceramics, and most plain and plated metal components. This material can withstand thermal cycling and shock loading between dissimilar materials. Slow Cure is ready to handle in 90 - 120 minutes.

H.B. Fuller Kodiguard is used to provide security, soundproofing, and media functionality for various applications. The product utilizes multi-component catalytic or single-part ultraviolet curing platforms to achieve its desired properties. One of the key features and benefits of H.B. Fuller Kodiguard is its ability to enhance security and provide soundproofing capabilities. Additionally, H.B. Fuller Kodiguard offers media functionality, which can include features like privacy films, solar control, or other specialized coatings that enhance the performance of laminated glass in specific applications. It is commonly used in the manufacturing of windows where security, soundproofing, and media functionality are desired.

H.B. Fuller EY3010 is a two-part, thixotropic epoxy compound. It is designed for use with Shur-Lok fasteners to achieve high strength and dependable bonded inserts in honeycomb panels. The handling properties of these products are similar. However, the H.B. Fuller EY3010 is designed for the lowest weight. It is available within NASA limits because it has the low volatile content required for space applications. H.B. Fuller EY3010 A/B is qualified for LAC 30-8036A.

Millennium One Step Foamable Adhesive® is a highly elastomeric, all-purpose, foamable adhesive that contains no solvents, sets in minutes, and is designed for use with our One Step™ application process. Millennium One Step™ application is quick and easy, resulting in significant labor savings for the contractor. No expensive, unreliable pump carts or spray rigs are required.

PVC TrimWelder™ Laminating Grade is a low-viscosity, solvent-free structural adhesive system designed for laminating unmilled PVC sheets and boards. Its lower viscosity provides greater flow-out with less clamping pressure to insure a thin, void-free bond. Cured performance shows excellent adhesion and bond strength in excess of the PVC. This material can withstand thermal cycling and shock loading between dissimilar materials. PVC TrimWelder™ Laminating Grade is ready to handle in 45 minutes and may be cut and machined in 1 hour.