Products

Swift®lock 2003 is a one-part hot melt adhesive that cures through a chemical reaction with moisture in the air and substrates. It is suitable for automotive interior trim applications and bonding a variety of wood-based substrates, such as soft woods, hard woods, particle board, MDF, papers, and wood veneers.

Cyberbond CB SH 27 is a medium-strength, high-viscosity anaerobic adhesive designed for use as a pipe and flange sealant, as well as an instant gasket. It can be easily dismantled if needed. Anaerobics are excellent sealants for threads and flanges. Anaerobics are solvent-free, one component adhesives.

H.B. Fuller MP54190GR is a two-part adhesive that is easy to mix and cures at room temperature, making it suitable for bonding a variety of materials, including metals, glass, ceramics, and plastics. This medium-viscosity polyamide/epoxy adhesive is recommended for low-stress, high-impact, and high-peel strength bonding applications of dissimilar materials, offering superior thermal shock resistance, dimensional stability, and resistance to water, weather, and many chemicals. This adhesive system is designed for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment with a recommended 1A:1B volume mix ratio. Handle cure time is typically 16–24 hours at room temperature, but this can be accelerated with heat. It's worth noting that cooler temperatures will increase work and cure times, and substrate heat-up time should be taken into account.

2002SAF is a single component low viscosity cyanoacrylate adhesive, suitable for general-purpose applications on metals rubbers and plastics. 2002SAF contains an optical brightener for easy detection.

Cilbond® 26 is a high-performance, one-component, toluene-free adhesive for rubber-to-substrate bonding applications. This product is ideal for use in a variety of rubbers, including SBR, natural rubber, and chloroprene rubber, and is typically used for industrial applications such as bonding parts in automotive and equipment manufacturing. Cilbond® 26 offers excellent bonding strength and superior performance in challenging conditions. It is ISO 9001 certified and provides a high level of durability and resistance to oils, fuels, and other harsh substances.

H.B. Fuller HL6737 is a foamable hot melt sealant designed for the appliance industry. It features excellent foam density reduction and, upon application forms a hard, resilient foam sealant. It has been specifically designed to be used in the appliance industry.

H.B. Fuller MP54110 is a two-part unfilled epoxy adhesive designed for bonding of metals, ceramics, and most plastics. This product gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. This product has better water and temperature resistance than standard 5-minute epoxy. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 30 - 60 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Cyberbond CB 1070 is very suitable for metal-to-rubber or plastic combinations. It is not recommended for bonding metal to metal. Due to its viscosity, CB 1070 should be considered the most favorable grade in this series. It is a general-purpose cyanoacrylate that is fast-bonding and has low viscosity.

Earthic™ 2025 is a versatile waterborne adhesive renowned for its exceptional properties. Notably, it boasts cleanability and resistance to condensation water, ensuring reliable performance even in demanding environments. Moreover, its easy wipe-off feature adds to its convenience, while its biodegradability underscores its commitment to sustainability. With Earthic™ 2025, you can trust in a solution that not only meets your adhesive needs but also aligns with environmental considerations.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Clarity® PHL4157 is an adhesive for food and beverage packaging, tapes, and labels, suitable for bottles, can labeling, container labeling, and containers. It is designed with sustainability in mind.

Cilbond® 82 is a solventborne adhesive and top coat that is ready to use. It exhibits excellent resistance to heat, pre-bake conditions, petrol, oil, grease, fuel, glycol, and hydraulic fluids. The product also provides outstanding salt spray resistance and maintains strong performance at low temperatures. Based on solvent-based, nonreactive bonding technology, it serves as a reliable top coat in paints and coatings applications.

Körapur® 140 is a single-component, elastic, moisture-curing polyurethane adhesive used for bonding and sealing primered and varnished metals, aluminum, wooden materials, and duroplastics. This high-strength, elastic adhesive has excellent properties such as high cold resistance, high heat resistance, excellent moisture resistance, and excellent weather resistance.

Lunamelt™ PS 4015 ZeroPack® is a hot melt pressure-sensitive adhesive with a good balance between adhesion and cohesion as well as good temperature and shear resistance. It has been specifically developed for the self-adhesive bonding of various films, plastic articles, foamed polystyrene, aluminum, papers, and rock wool.

Rakoll® HL9622 is a high-performance polyurethane adhesive designed for corner key and door light applications. With its exceptional green strength, it provides reliable bonding for vinyl, paper, and wood veneers to MDF, particle board, and composite materials. This adhesive is particularly suitable for interior profile wrapping on windows.

Earthic™ 2023 is a water-based labelling adhesive with the following characteristics: strong resistance to ice water, medium to high resistance to condensation water, excellent cleanability, very good machinability (up to 70,000 bottles per hour), highly recommended for returnable bottles in the standard wash-off process, and very good condensation water resistance on cold and wet bottles. Typical applications include glass labelling.

Cilbond® 48 is a clear, single-component bonding agent designed for both cold and hot-cure applications (65-275°F/20-135°C) with castable polyurethane systems and injection-molded thermoplastic polyurethane (TPU) systems on metal and plastic substrates. It provides exceptional corrosion resistance and offers the advantage of fast drying. Cilbond® 48 can be used without the need for a pre-bake process and has been specifically developed for use in dynamic conditions where hydrolytic stability is crucial.

Royal Sealants WS-8035 Class B is a rapid-cure and lightweight polysulfide sealant specifically formulated for fuel tank sealing applications in the space exploration industry. Its fast curing properties and low weight make it an ideal choice for ensuring secure and reliable seals in the demanding environment of space exploration.