Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features and Benefits
- Fast curing
- RoHS compliant and Halogen free
- Non-corrosive, low odor
- Excellent adhesion to a wide variety of substrates including glass, metal and plastics
- Wide operating temperature range
- Very fast setting and fast curing enabling reduced production times
Applications & Uses
- Markets
- Applications
- Application Area
- Typical Applications
- Seam sealing
- Bonding to Glass, Plastic and Metals
- Bonding and sealing in appliance applications
- General assembly sealing
- General Instructions
a) For best performance bond surfaces should be clean, dry and free of any contaminants and oils.
b) Mix Parts A and B evenly according to the applicable mix ratio. Machine meter mix is recommended.
c) Apply the mixture to the surface or seam. Automated dispensing equipment is recommended for seam sealing applications.
d) Excess materials can be removed after the fixture time.
e) It is recommended to schedule a timely purge for the use of mixed material in the static mixer. This is done to avoid inconsistent mixing and to ensure desired performance and properties.
f) Material is a secondary moisture-cure type material. It will start to cure immediately after mixing two-components. Moisture in the air will assist to cure material.
Properties
- Physical Form
- Electrical Properties
- Cured Properties
- Damp Heat Aging Test Properties
- Uncured Properties
- Rheological Properties
- Note
Test Sample Conditions:
2mm Thickness, Cured at 23±2ºC, 50±5%RH for 7 days. Tested at 23±2ºCThe values noted in this data sheet are typical properties only and are not intended to be used as material specifications. For assistance in writing a material specification, please contact H.B. Fuller Company for further details.
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 4.0 x 10¹⁴ | Ω.cm | GB/T1692 |
| Breakdown Voltage | 20.0 | kV/mm | GB/T1695 |
| Value | Units | Test Method / Conditions | |
| Elongation at Break (50% RH) | 200.0 | % | GB/528 |
| Tensile Strength (50% RH) | 2.4 | MPa | GB/528 |
| Thermal Service Range | - 40 - 200 | °C | - |
| Hardness | 41.0 | - | GB/T531, Shore A |
| Lap Joint Shear Strength (Aluminum, 50% RH) | 1.3 | MPa | GB/T7124 |
| Value | Units | Test Method / Conditions | |
| Hardness | 32.0 | - | GB/T531, Shore A |
| Elongation at Break (50% RH, 85°C, for 1000h) | 180.0 | % | GB/528 |
| Shear Strength (50% RH) | 1.0 | MPa | GB/T7124 |
| Tensile Strength (50% RH) | 1.8 | MPa | GB/528 |
| Value | Units | Test Method / Conditions | |
| Fixture Time | 20 - 30 | min | - |
| Weight Mix Ratio | 12.2:1 | - | - |
| Volume Mix Ratio | 10:1 | - | - |
| Specific Gravity | 1.28 | - | - |
| Working Time | 10.0 | min | - |
| Cure Schedule (at 25°C) | 24.0 | h | - |
| Cure Schedule (at 45 - 55% RH) | 7.0 | days | - |
| Value | Units | Test Method / Conditions | |
| Viscosity | Thixotropic paste | - | - |
Technical Details & Test Data
- Curing Conditions
Cure speed will vary with temperature, relative humidity, depth of material and presence of moisture. Some applications may require special surface preparation. Contact H.B. Fuller Company technical support for additional curing recommendations.
Packaging & Availability
- Regional Availability
- Ordering Information
Stock No.
- 253601, 410ml
- 25360105, Part A: 220kg, Part B: 18kg
Storage & Handling
- Storage Conditions
Product shall be ideally store in a cool, dry area in unopened containers. Material should be stored at a temperature of 5-25°C for a maximum shelf life of 6 months in the original unopened container. Do not return unused material back into the container.