Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
- Proper mix ratio - no mistakes
- Single use package - travels well
- Sealed for protection - no contamination
- Color coded to grab & go
- No messy tubes with ill-fitting caps
- Ideal for emergency repairs on tough-to-bond substrates
- Product Attributes
- Bonds: Urethane parts, thermoplastics, laminated surfaces, metal, leather, glass, and stone
- Tough: Good impact resistance
- Fast: Fast setting time
- Versatile: Works on a wide variety of substrates
- Product Features
Permanently Bond Almost Anything
Epoxy adhesives are higher strength solutions and prevent surfaces from moving. Urethane adhesives retain flexibility and are better suited for structures that contract or expand with temperature. These products offer good chemical resistance, which reduces repeated or nagging repair cycles. GorillaPro epoxies and urethanes can permanently bond almost anything, including engineered thermoplastics, thermosets, nylon, composites, e-coat, and metals.- Strong, rigid bonding
- Excellent resistance to heat and chemicals
- Withstands constant weight or force over time
High-Performance MRO Solutions
Proactive maintenance can help prevent costly unplanned downtime. It’s a challenge keeping up with maintenance activities while keeping teams trained, equipment operating, and driving productivity. With a full complement of maintenance adhesives, repair epoxies, lubricants, and sealants, GorillaPro products can repair and improve the reliability of almost any piece of equipment or machinery.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Application Method
Recommended Substrates
Engineered thermoplastics, SMC, laminated surfaces and repair of reaction injection molded parts, metal, carbon steel, stainless steel, aluminum, tin, plastic, epoxy, polyester, phenolic, urethane, stone, glass, ceramic, leather.
Typical Uses
Fast Setting Urethane can be used to repair urethane reaction injection molded parts. It is recommended for repair of rubber hoses, conveyor belts, flexible electrical connections, and bonding refrigeration and air-conditioning equipment.
Curing Process
The cure schedule is dependent upon the temperature. The recommended cure schedule will vary with the desired properties.
Instructions
The surface must be clean and dry before application. Remove all chemicals, dirt, wax, and oil. Fold the DOUBLE/BUBBLE® package along the center seal, snip the end, squeeze out the contents, mix thoroughly and apply.
Avoid contamination with oxidized metals (such as copper, brass, or mild steel), and rust or other metal oxides. The stability of the product is greatly reduced by materials such as strong acids or bases, sulfur compounds, amines, or reducing agents of any type. Surfaces to be bonded must be clean, dry and free from grease, oil, wax, weak oxide films, and other contaminants.
Properties
- Physical Properties
- Cured Mechanical Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Technology/Base | Polyurethane | — | — |
| Type of Product | Structural Adhesive | — | — |
| Components | Two-Component | — | — |
| Curing | Room Temperature (secondary thermal cure) | — | — |
| Consistency | Thick Viscous Liquid | — | — |
| Value | Units | Test Method / Conditions | |
| Hardness (Shore D) | 80 - 85 | — | ASTM D2240 |
| Tensile Strength (at 25°C, 50% RH) | 2645.0 | psi | ASTM D638 |
| Elongation at Break | 122.0 | % | — |
| Overlap Shear Strength Aluminum, Acid Etched (at 25°C, 50% RH) | 4296.0 | psi | ASTM D1002 |
| Overlap Shear Strength Aluminum, Acid Etched (at -40°C, 50% RH) | 3569.0 | psi | ASTM D1002 |
| Overlap Shear Strength Aluminum, Acid Etched (at 82°C, 50% RH) | 487.0 | psi | ASTM D1002 |
| Overlap Shear Strength Aluminum, Acid Etched (at 149°C, 50% RH) | 361.0 | psi | ASTM D1002 |
| Tear Strength | 800.0 | pli | Acid etched Al-Al |
| T-Peel Strength | 15.1 | pli | — |
| T-Peel Strength (at -40°C) | 4.4 | pli | Acid etched Al-Al |
| T-Peel Strength (at 82°C) | 4.5 | pli | Acid etched Al-Al |
| Value | Units | Test Method / Conditions | |
| Viscosity - Part A (at 25°C) | 18000.0 | cPs | — |
| Viscosity - Part B (at 25°C) | 4000.0 | cPs | — |
| Viscositv - Mixed (at 25°C) | 11000.0 | cPs | — |
| Specific Gravity - Part A | 1.11 | — | — |
| Specific Gravity - Part B | 1.47 | — | — |
| Specific Gravity - Mix | 1.26 | — | — |
| Volume Mix Ratio | 100 - 78 | — | — |
| Weight Mix Ratio | 100 - 100 | — | — |
| Gel Time (at 25°C) | 4.0 | min | — |
| Preparation Mass | 4.0 | gram | — |
| Handling Time | 1.0 | hours | — |
| Full Cure (at 23°C) | 24.0 | hours | — |
| Alternate Cure (at 25°C) | 24.0 | hours | — |
| Overlap Shear Strength (15 min, at 25°C) | 150.0 | psi | Aluminum, Acid Etched |
| Overlap Shear Strength (30 min, at 25°C) | 1000.0 | psi | Aluminum, Acid Etched |
| Overlap Shear Strength (60 min, at 25°C) | 1500.0 | psi | Aluminum, Acid Etched |
Storage & Handling
- Shelf Life
- 12 months