Body Shop & Repair

H.B. Fuller 7039-1 heat-expandable sealant is a die-cut rubber-based sealer that expands with the application of heat to form a flexible closed-cell foam. This product is recommended for filling openings between metal parts where sound and vibration damping are required. It is also recommended for metal-to-metal bonding where medium strength can be tolerated.

H.B. Fuller 7155-3 heat-expandable sealer is a die-cut, rubber-based sealer that expands with the application of heat to form a flexible, closed-cell foam. It has excellent adhesion to galvanized and primed steel and is recommended for use between metal components to create a watertight seal.

Tuskbond Infusion 701 - 22L Canister is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding. The super-fast drying time ensures that layers can be built up with minimal time waiting for the adhesive to dry. Tuskbond Infusion 701s unique pebble spray technology covers areas fast and provides a flat bonding surface in seconds.

Tuskbond Infusion 305 - 500ml Aerosol is a sprayable adhesive developed for bonding foam to itself and to timber during the construction of foam plugs. The adhesive is quick to apply and fast drying so plugs can be built quickly. The adhesive is very tacky and can be used as a one or two way stick depending on the strength of bond required.

H.B. Fuller 4193HD pressure-sensitive mastic patch is usually laminated to a plastic film or foil to facilitate installation. It can be die-cut into simple or complex shapes as required by the application. When the appropriate film or foil is used, this material can be applied before paint with no negative impact during bake cycles.

Cyberbond CB 2240 is a partly flexible cyanoacrylate, also known as rubber tough. It allows dynamic and temperature-loaded bonds and guarantees certain shock-absorbing properties. This grade is also excellent for combination bondings like metal to rubber or metal to plastic. CB 2240 is a colorless, opaque grade with outstanding performance. Dispensing via, e.g., LINOP dispensing equipment is limited.

Tuskbond Infusion 305 - 22L Canister is a sprayable adhesive developed for bonding foam to itself and to timber during the construction of foam plugs. The adhesive is quick to apply and fast drying so plugs can be built quickly. The adhesive is very tacky and can be used as a one or two way stick depending on the strength of bond required.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

Tuskbond Infusion 900 - 22L Canister is a super tacky spray adhesive developed for holding heavy and thick mats in place during resin infusion processes. The product is extremely tacky and maintains its tack for long periods of time, making the product perfect for larger areas or deep crevices in the mould. Tuskbond Infusion 900 has a web spray pattern which provides a cross linking effect over the fibres of the reinforcement.

Tuskbond Infusion 707 - 22L Canister is a mist spray adhesive developed to hold reinforcement fibres in place during RTM applications. The specially developed mist spray pattern provides a soft, non-dimpling glue line that is perfect for areas that need to maintain a smooth, aesthetic finish and won’t soak into fibres. It also maintains its tack which allows reinforcements to be repositioned if needed.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

H.B. Fuller 7148-3 is an EVA thermoset sealer that can be die-cut and has excellent adhesion to many metal substrates after undergoing a bake cycle. It is used in automotive OEM applications to seal plugs or drain holes on metal products.

H.B. Fuller EV Seal 901 BCF is a highly compressible PVC foam core encapsulated with high-tack butyl adhesive/sealant. This flexible material conforms readily to corners and irregular contours. It gives a secure seal that helps protect against water penetration and prevents corrosion and moisture damage.