Products

Cyberbond CB 1070 is very suitable for metal-to-rubber or plastic combinations. It is not recommended for bonding metal to metal. Due to its viscosity, CB 1070 should be considered the most favorable grade in this series. It is a general-purpose cyanoacrylate that is fast-bonding and has low viscosity.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Cilbond® 82 is a solventborne adhesive and top coat that is ready to use. It exhibits excellent resistance to heat, pre-bake conditions, petrol, oil, grease, fuel, glycol, and hydraulic fluids. The product also provides outstanding salt spray resistance and maintains strong performance at low temperatures. Based on solvent-based, nonreactive bonding technology, it serves as a reliable top coat in paints and coatings applications.

Cilbond® 48 is a clear, single-component bonding agent designed for both cold and hot-cure applications (65-275°F/20-135°C) with castable polyurethane systems and injection-molded thermoplastic polyurethane (TPU) systems on metal and plastic substrates. It provides exceptional corrosion resistance and offers the advantage of fast drying. Cilbond® 48 can be used without the need for a pre-bake process and has been specifically developed for use in dynamic conditions where hydrolytic stability is crucial.

H.B. Fuller EV Protect 300 is a two-component, low viscosity polyurethane encapsulating system that is designed for potting and encapsulating of battery cells in battery modules. This product offers battery designers the ability to enhance safety and protection from thermal propagation.

Swift®tak 5090L is a versatile water-based adhesive designed for polyethylene (PE), paper, and kraft paper substrates. It provides excellent machinability and good adhesion, making it ideal for folding box applications. This product can be applied using roller or brush methods, ensuring flexibility in its application process.

Swift®col 2035 is a solvent-based bonding solution that offers premium performance on polar materials, even under cold contact conditions. This can be used for various applications such as press lamination, vacuum lamination, edge folding, priming, and attachment. It is ideal for interior applications.

Masterfix 888 is a one-component, high-performance, fast-curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength, making it an ideal high-quality PUR-based adhesive for various applications in the woodworking industry.

FLX 530 primer is a single component, dispersion primer specially developed to enhance the bonding strength of FLX self leveling and smoothening compounds with absorbent screeds and concrete floors.

Cilbond® 12E is a solvent-based primer with high-temperature resistance. It provides excellent corrosion resistance and substrate protection. It is used in conjunction with CILBOND 80ET as a high-performance primer for rubber-to-metal bonding. It offers outstanding temperature resistance, glycol resistance, and corrosion performance, making it suitable for high-temperature and aggressive environments. It is commonly used in the manufacturing of high-performance rubber-to-metal bonded parts in industries such as agricultural and construction machinery, MRO (maintenance, repair, and operations), aerospace, and automotive.

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

Adecol® C-94 adhesive is a copolymer based on vinyl/ethylene acetate in aqueous dispersion, modified with special additives. Adhesive presents high performance in grip, initial tack and fast drying, providing optimal machinability performance. It is commonly used in the side and bottom closure of boxes, and can be applied using automatic machine or manual application.

Cilbond® 63W is a specialty water-based, one-component bonding system designed for the friction industry, specifically formulated for roller coating applications. This product is a ready-to-use liquid with excellent properties, including high fatigue resistance, heat resistance, and resistance to water, oil, fuel, diesel, and salt spray. It is a solvent-free, lead-free product, ideal for bonding to metal substrates. Its water-based formula makes it an environmentally friendly choice for aftermarket brake pad applications in the automotive sector. Cilbond® 63W is certified ISO 9001 and available for application via nozzle, spray, brush, or dip coating methods. Its outstanding performance in various conditions ensures superior bonding strength. Cilbond® 63W is a high-performance, waterborne adhesive, offering excellent resistance to challenging environments.

Cyberbond CB 5500 is a cyanoacrylate with low odor, low blooming (whitening effect), and low outgassing characteristics. These very positive properties unfortunately go along with lower strength features compared to the ethyl ester-based cyanoacrylates. CB 5500 is a very low-viscosity grade with wicking properties.

Foster® 40-30™ Fungicidal Protective Coating is a low-odor, fast-setting, water-based surfacing material specifically crafted for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. This formulation is highly effective at preventing the growth of mold and odor-causing bacteria on its surface for an extended period of time.

Foster® Line-FAS™ Adhesive 85-00 is an economical, water-based duct liner adhesive, composed of pure polymer. This adhesive is characterized by its outstanding fire resistance, rapid tack development, and strong bonding capabilities. It provides a reliable and cost-effective solution for securing duct liners in various HVAC applications.

Adecol® C-550 is an aqueous dispersion of a polyvinyl acetate homopolymer that has been modified with special additives. It has good fluidity and fast initial tack, making it ideal for high-speed machines. This adhesive is commonly used for side closure of boxes and can be applied using a nozzle system in an automatic machine.

Adecol® C-223G adhesive is an aqueous dispersion of a copolymer based on vinyl/ethylene acetate that has been modified with special additives. It has excellent fluidity and initial tack, as well as good grip. This adhesive is typically used for side and bottom closure of envelopes and cardboard boxes, and can be applied using a nozzle in automatic equipment.