Products

Millennium LVOC Canister Flush Solution is a solvent-based solution designed for the convenient cleaning and flushing of spray adhesive applicators. It provides an effective method to clean adhesive applicators, hoses, and accessories after using solvent-based adhesives from a canister. The solution is formulated to efficiently flush and clean adhesive application equipment, ensuring proper maintenance and preventing clogs or blockages. It helps remove residual adhesive and prevents cross-contamination between different adhesive types. The solution is formulated to efficiently flush and clean adhesive application equipment, ensuring proper maintenance and preventing clogs or blockages. It helps remove residual adhesive and prevents cross-contamination between different adhesive types.

Millennium Canister Flush Solution is a solvent-based solution designed for the convenient cleaning and flushing of spray adhesive applicators. It provides an efficient method to clean adhesive applicators, hoses, and accessories after using solvent-based adhesives from a canister. The solution is formulated to effectively flush and clean adhesive application equipment, ensuring proper maintenance and preventing clogs or blockages. Millennium Canister Flush Solution is commonly used in the application of single-ply membrane adhesives, where proper cleaning and maintenance of adhesive equipment are crucial for optimal performance and longevity.

Millennium PG-1 SAF Pump Grade Adhesive is a uniquely formulated version of PG-1 Adhesive that is free of amines and siloxanes. PG-1 SAF was designed for ultra sensitive roofing applications such as electronics. Application is quick and easy resulting in significant labor savings for the contractor. Millennium PG-1 SAF Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart*, or an approved low pressure pump cart (by Garlock) which equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.

FulaFlex™ 620 is a high-performance, isocyanate-free sealant made from methoxysilyl-terminated silane polymer. It forms a tough, elastic, and weatherproof seal with good chemical resistance, ideal for areas with significant expansion and contraction. Easy to apply and tool off.

Magik 8560 is a UL Classified, zero VOC, premium quality water-based adhesive with high tack and rapid setting. It is formulated with a special type of synthetic resin, high-performance additives, fine grade mineral fillers, and tackifiers. Magik 8560 is non-flammable when wet, fire-resistant when dry, and highly antibacterial.

Millennium PG-1 Pump Grade (Fleeceback Membrane) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. It is approved for use in VOC-regulated markets such as California and other OTC States. Application is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through any of the application tools designed for 2-part urethane, including the Patented Multi-Bead* and Multi-Bead Plus** applicators, the Patented Millennium Cyclone pump cart+ (by Garlock), or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive.

Millennium Hurricane Force® Membrane Adhesive HS is a two-component, fast-setting polyurethane adhesive designed for use with the One StepTM application process. This adhesive is essentially VOC-free and becomes waterproof within minutes of application. Its unique formula ensures optimal performance in a range of applications, providing superior adhesion and durability.

FulaFlex™ Construction GP is a high-performance, isocyanate-free sealant made from methoxysilyl-terminated silane polymer. It forms a tough, elastic, and weatherproof seal with good chemical resistance, and is easy to apply and tool off for general-purpose construction use.

Millennium PG-1 Pump Grade (Low Viscosity Insulation) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. The application process is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart* (by Garlock) or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.

Millennium EPDM Seam Tape is a black, vulcanized rubber, pressure-sensitive adhesive tape designed to provide high strength and watertight seams for single ply EPDM roofing membranes. Millennium EPDM Seam Tape is soft and tacky, providing a quick grab onto EPDM field membranes, yet possesses high initial strength. Millennium EPDM Seam Tape exhibits excellent adhesion to most substrates, including glass, metals, wood, concrete, masonry, and some plastics. This tape will provide OEM-quality performance for EPDM single-ply restoration projects.

Millennium Hurricane Force® Universal Sealer Extreme is a fast-setting, solvent-free, multi-use universal sealer that becomes waterproof within minutes of application. The formula is essentially VOC-free, making it approved for use in regulated markets such as California and OTC states. Millennium Hurricane Force® Universal Sealer Extreme is a two-component product that cures via a chemical cross-linking mechanism. Unlike one-part moisture-cure sealants, Universal Sealer Extreme will cure consistently and quickly throughout, rather than simply skinning over and remaining tacky on the inside.

Millennium Hurricane Force® Lap and Flashing Adhesive is a two-component, fast-setting, essentially VOC-free polyurethane adhesive that forms a strong bond between the roof membrane and substrate within minutes of application. The high viscosity, high-solids formulation of Millennium Hurricane Force® Lap and Flashing Adhesive makes it ideal for installing flashing membrane on vertical substrates and quickly sealing membrane side and head laps.

Millennium Universal Primer is an all-purpose water-based primer designed for use with the entire Millennium family of products. The primer is easy to apply and requires no mixing. A red tint offers easy recognition of areas where the primer has been applied.

Millennium One Step Foamable Adhesive® is a highly elastomeric, all-purpose, foamable adhesive that contains no solvents, sets in minutes, and is designed for use with our One Step™ application process. Millennium One Step™ application is quick and easy, resulting in significant labor savings for the contractor. No expensive, unreliable pump carts or spray rigs are required.

Cool Cover™ Seam Tape is an extruded, vulcanized, white pressure-sensitive rubber adhesive tape designed to provide high strength and watertight seams for single-ply TPO roofing membranes. Cool Cover™ Seam Tape is soft and tacky, providing a quick grab onto TPO field membranes, yet possesses high initial strength. Cool Cover™ Seam Tape also exhibits excellent adhesion to polar and nonpolar substrates such as glass, metals, wood, concrete, masonry, and some plastics. The tape is useful for seaming TPO waterproofing systems when heat welding is inconvenient or not an option.

Millennium One Step Green® Foamable Adhesive is an exciting, new, patented*, essentially VOC-free, all-weather insulation adhesive manufactured with an industry-leading 45%** rapidly renewable material content. Millennium One Step Green® Foamable Adhesive carries all of the equivalent FM approvals of our highly popular One Step Foamable Adhesive® and is designed for use with our One StepTM application process. Our One Step™ application process eliminates errors due to poor mixing. The application process is quick and easy, resulting in significant labor savings for the contractor. No expensive, high-maintenance specialty pumps or spray rigs are required.