Products

Adcotherm HMC-1 is a specialized blend of select polymers formulated specifically for use in door and deck lid weatherstrips. This sealant is known for its homogeneity and complete moisture resistance. It exhibits strong adhesion to rubber weatherstrips and basecoat and clearcoat paint systems, showcasing excellent heat aging resistance and long-term weathering. It also offers low insertion forces within a range of temperatures and remains static within the weather strip during shipping and handling.

Ipacoll™ LP 2718 is a water-based dispersion adhesive with a high initial tack and good adhesion to difficult surfaces. It provides excellent adhesion on hard-to-bond surfaces and good machinability. This adhesive is designed for laminating cardboard to paper or to films such as PVC, OPP, POF, and treated PP and PE films.

Adcotherm ADS-340 emerges as a potent adhesive and sealant solution. This high-strength, synthetic elastomer-based adhesive or sealant, when applied hot, forms an enduring bond across diverse substrates. Its versatile nature ensures a secure seal, guarding against the intrusion of moisture, dust, and air.

H.B. Fuller Ipacoll™ PWC 3135 PB water-based adhesive that exhibits excellent adhesion on coated surfaces and foils. The product is specifically recommended for use on folding boxes, case sealings, as well as for window gluing in the packaging industry; especially used in the food industry as well as for deep freezing goods.

Adcotherm HMC-7RC is a hot-applied butyl rubber-based adhesive and sealant that bonds to various substrates, creating a permanent seal against moisture, dust, and air intrusion. It exhibits excellent adhesion to glass, EPDM, PVC, and painted metal substrates and is highly resistant to both interior and exterior environmental conditions.

Körapur® 666 is a two-component polyurethane adhesive specifically designed for panel manufacturing. It is certified by the International Maritime Organization (IMO) and offers improved humidity resistance. With its high mechanical properties, it is ideal for various applications in panel manufacturing, including chassis finishing such as side-paneling, side walls, floors, roofs, and sandwich assemblies. It is widely used in the production of industrial panels, trailers, and commercial vehicles.

Swift®col 2411 is a versatile ready-to-use adhesive classified as a contact adhesive, reactive adhesive, and solventborne adhesive. It is employed in various applications, including automotive headliners and textiles. You can apply it using methods such as brushing or spraying. This adhesive exhibits excellent adhesion to a wide range of substrates and surfaces, including painted surfaces, plastics, fiberboard, textiles, wood, metal, elastomers, rubbers, EPDM, foils, polyolefins, coated surfaces, and polypropylene (PP). It is also recognized for its heat- and water-resistant properties.

Adecol® C-360/5 adhesive is a copolymer that is based on vinyl / ethylene acetate in an aqueous dispersion, modified with special additives. It is a high-performance adhesive with a quick dry, fast tack performance and strong adhesion and cohesion, even in substrates with low superficial tension.

H.B. Fuller EH9641 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material with a secondary moisture cure system. This material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9641 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, and common engineered plastics such as polycarbonate.

H.B. Fuller EV Therm 440 is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. EV Therm 440GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

Swift®tak 5161 is a water-based adhesive known for its general-purpose fast-setting performance. It provides a clean application on high-pressure nozzle applicators and is Baumer HHS-approved. It fulfills typical direct food contact requirements and is commonly used in high-pressure, contactless nozzle systems. It is ideal for use on lacquered and OPP-pretreated surfaces in the bag and sack industry.

H.B. Fuller MP54750 is a low-viscosity polyamine epoxy designed for bonding metals and plastics. It is also ideal for highway and bridge deck repairs, potting, casting, encapsulation, synthetic flooring systems, maintenance coatings, and tank and pipe linings. This product provides good chemical, corrosion, and water resistance.

Rakoll® HL9622 is a high-performance polyurethane adhesive designed for corner key and door light applications. With its exceptional green strength, it provides reliable bonding for vinyl, paper, and wood veneers to MDF, particle board, and composite materials. This adhesive is particularly suitable for interior profile wrapping on windows.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

H.B. Fuller EH9672 is a fast-setting, reactive hot melt adhesive and sealant. It is a 100% solid, one-component material with a secondary moisture cure system. This material is applied warm and sets immediately, allowing handling without the need for heat curing. It has optimum adhesion to a wide range of substrates, including aluminum, stainless steel, and especially common engineered plastics such as polycarbonate, ABS, and nylon. H.B. Fuller EH9672 may also be easily reworked by heating the bonded assembly to 80 - 90°C, allowing damage-free disassembly. The cured product can then be easily removed, leaving minimal residue.