Products

Foster® Bridging Mastic Encapsulant-Lockdown 32-80™ is a dual-purpose coating designed for asbestos abatement. It is field-proven and, upon curing, forms a tough, light-colored, washable, abrasion-resistant elastomeric coating. This coating effectively reduces the release of asbestos fibers from both conventional and spray-applied asbestos-containing materials (ACM). When used with glass cloth, Foster® Bridging Mastic Encapsulant-Lockdown 32-80™ is ideal for covering interior pipe insulation and boiler lagging.

Foster® Protektor® Sealant 32-21 is a single-component acrylic copolymer coating used for abating asbestos fiber fallout through the retention method. This sealant penetrates asbestos-containing materials deeply, drying to establish a firm, lightweight, and damage-resistant surface. It is applied using an airless spray, with a mild odor when wet and none when dry.

H.B. Fuller EV Protect 5006 offers battery designers the ability to integrate high-level structural performance characteristics into their battery system, which is ideal for cell to pack applications. This ultra-lightweight material minimizes weight addition to the battery pack and, when exposed to a thermal event, significantly reduces or delays thermal propagation. With a reduced viscosity and improved curing speed, the EV Protect 5006 is especially advantageous for those with unique, complex, or intricate battery design architecture. Works in all types of battery cell form factors (cylindrical, prismatic, or pouch).

H.B. Fuller EV Protect 4006 is a liquid-applied, two-component, flame-retardant, low-density polyurethane foam material designed for the potting and encapsulation of battery cells in EV battery modules. EV Protect 4006 SFR offers battery design engineers the ability to increase the power density of their modules while enhancing safety and protection from thermal propagation. The ultra lightweight nature of the EV Protect 4006 SFR minimizes the weight impact to the battery modules. The semi-structural properties of the material also provide noise, vibration, and harshness benefits to the battery system by unitizing the battery module and absorbing external environmental impacts.

H.B. Fuller EV Protect 5008 is an encapsulant used in adhesives and sealants. It is designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

H.B. Fuller EV Protect 300 is a two-component, low viscosity polyurethane encapsulating system that is designed for potting and encapsulating of battery cells in battery modules. This product offers battery designers the ability to enhance safety and protection from thermal propagation.

Foster® Chil-Bridge™ CP-211 is a polymeric, water-based coating designed for the protection and isolation of asbestos-containing materials (ACM). It is suitable for use in both indoor and outdoor applications. When applied over various forms of ACM, it effectively bridges, encases, and seals friable asbestos fibers.

Foster® Bridging Encapsulant 32-32 is a single-component, water-based elastomeric product with pigmentation. It is designed for interior use over asbestos-containing materials (ACM) of fibrous and cementitious types. This product can be easily applied via spray, and once cured, it forms a resilient, durable elastomeric film over the ACM. This film effectively delays the release of friable asbestos fibers.