H.B. Fuller logo

Swift®col 1919 Blue

1 of 365 products in this brand
Swift®col 1919 Blue is a solvent-based adhesive formulated with rubber as its base. This adhesive is designed for effectively bonding various materials. It is particularly suitable for bonding PP foam, PU foam, and fabric-based PVC with PP or ABS substrates. With its good spraying property and rapid drying speed, Swift®col 1919 Blue offers excellent performance. It complies with the national standard GB 33372 and boasts attributes such as strong adhesive properties, extended holding time, and outstanding resistance to heat and aging.

Product Type: 1K (1 component) Adhesive, Solventborne Adhesive

Application Method: Spray

Compatible Substrates & Surfaces: Polypropylene(PP) Foam, Polyurethane (PU) Foam, Polyvinyl Chloride (PVC)

Features: Fast Drying, Good Stickiness, Heat Resistance, Improved Ageing Resistance, Long Holding Time

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Product Type

1K (1 component) Adhesive,

Solventborne Adhesive

Technologies

Adhesives & Sealants

Product Families

Adhesives & Sealants — Bonding Technology

1K Liquid Reactive Adhesives,

Solvent-Based Reactive Adhesives

Features & Benefits

Ready-to-Use Product Features

Fast Drying,

Good Stickiness,

Heat Resistance,

Improved Ageing Resistance,

Long Holding Time

Product Benefits
  • Good spraying property, fast drying speed
  • Meet national standard GB 33372
  • Good stickiness, long holding time
  • Excellent heat and aging resistance

Applications & Uses

Application Method

Spray

Compatible Substrates & Surfaces

Polypropylene(PP) Foam,

Polyurethane (PU) Foam,

Polyvinyl Chloride (PVC)

Cure Method

Moisture Cure

Directions for Use
  1. Pre-treatment: surfaces must be clean and free from dust, andfatty substances.
  2. Keep protected from excessive moisture when bonding atroom temperature.
  3. It is recommended to bond after heating when in theexcessive moisture or cold condition. Keep protected fromexcessive moisture, acetone and other solvents.
  4. The remaining adhesive should be resealed in time, and usedup within 48 hours, if the product cannot be used up at one timeafter opening.
  5. The optimum application condition: environment temperatureis between 18℃ and 35℃, the humidity is between 50% and70%.
Curing Profile
It is recommended to cure at a suitable temperature and humidity(for example, temperature 15-35℃ and humidity 50-90% RH).If the thickness of the coating film is below 0.5mm, the curing willbe completed within 5 days under the recommended conditions.The curing is not only dependent on the applied film thickness, butalso on the moisture content of the air, temperature, moisturecontent and permeability of the substrates.
Work Instructions
  1. Application: spraying, the diameter of spray nozzle is 1.5-2.0mm, and the air pressure is 3.0-5.0kgf/cm².
  2. Coating weight: 80-160g/m² (wet).
  3. Drying: drying in a oven at 70±10℃ for 3-5min or drying atnormal temperature and humidity for 10-15 min.Drying standard: No wet feeling when touched by hand.
  4. Activation: the activation temperature should be above 52℃,bond as soon as possible after activation.
  5. Molding: the pressure should be above 0.10MPa, and themolding time should be more than 20 seconds.
  6. Curing: Curing time is about 120-168 hours at temperature 15-35℃ and humidity 50-90%.

Properties

Color

Blue

Physical Form

Liquid

Appearance
Light blue or blue uniform liquid
Typical Properties
ValueUnitsTest Method / Conditions
Solid Content18 - 20％—
Consistency (at 25±1°C)130 - 250mPa.s—
Density0.81 - 0.91g/m³—
Suggested Dispensing Quantity (Wet Glue)80 - 160g/m²—

Regulatory & Compliance

Certifications & Compliance

GB 33372

Storage & Handling

Shelf Life
6 Months
Storage Conditions
Keep protected from moisture. Store in a cool and dry conditionbetween 10℃ and 35℃.