Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Product Application Instructions
- Surfaces to be bonded should be clean and dry. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film layer after compression. Press parts together and expose to energy when ready. An adequate bond will develop rapidly, depending on UV dose efficacy, and maximum strength is achieved when the adhesive reaches full cure. Bonds should be allowed to cool before applying any stress.
- Product Application Instructions
- Photoinitiation initiates the curing process. Handling strength is reached in a short time, and will vary based on UV dose efficacy, environmental conditions, bond line gap, and other factors.
Properties
- Physical Form
- Appearance
- Clear liquid
- Cured Properties
Value Units Test Method / Conditions Storage Condition (in darkness) 8 - 21 °C - Shore Hardness 76 - 78 - Shore D Optimum Wavelength 365 - 395 nm - - Uncured Properties
Value Units Test Method / Conditions Base Compound Modified acrylate - - Viscosity 650 - 950 cPs - Specific Gravity 1.08 - -
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 12 months (Uncured)
- Storage Information
- Products should be stored unopened in a cool, dry place out of direct sunlight. Products should be kept at room temperature away from direct light. Protect from extreme heat or cold, optimum temperature is between 8°C and 21°C.