Products

Foster® Weatherite™ Mastic 46-50 is a fibrated, water-based breather mastic with a smooth, thixotropic consistency for easy application. It boasts a bright white color, is non-flammable when wet, and emits a mild odor during use. This mastic exhibits excellent brush, trowel, and spray properties.

Foster® Chil-Lock CP-240 Asbestos Removal Agent/Post Removal Sealer is an economical, fire-retardant, polymeric water-based asbestos removal agent and post-removal sealer. In its role as a post-removal sealer, it is specifically designed to mist, securely bind, and seal free asbestos fibers and any residual asbestos-containing material (ACM) remaining after removal. This highly effective solution firmly locks ACM onto cleaned, exposed surfaces and polyethylene sheeting within the containment area, preventing the release of loose fibers into the air.

Foster® Eclipse™ Coating 40-11 is a low-odor, fast-setting, water-based surfacing material designed for field or shop application to faced or unfaced fiberglass duct liner or fiberglass duct board insulation. Its low viscosity enables application with a wide range of spray equipment available in the market.

Foster® Chil-Bridge™ CP-211 is a polymeric, water-based coating designed for the protection and isolation of asbestos-containing materials (ACM). It is suitable for use in both indoor and outdoor applications. When applied over various forms of ACM, it effectively bridges, encases, and seals friable asbestos fibers.

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

H.B. Fuller 20277 is a one-component, water-based fugitive adhesive and coating material designed for fast drying, clean machining, non-blocking, and excellent lay-flat and humidity resistance. It is suitable for spray, pattern, and extrusion applications and can be used to protect metals, fiberglass, contoured sheets, and other surfaces from weathering and discoloration during transportation.

UltraShield AC 10 is a single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.

HydroArmor® 7720 is a latex coating that prevents water from wicking into boat flooring, bus flooring, and recreational vehicle walls. HydroArmor® 7720 can be brushed or rolled onto floor boards, the cut edges of floor boards, wall edges, and to window and wheel openings. The coating dries to form a waterproof seal that prevents moisture from wicking into the AB marine wood flooring, plywood, soft and hardwood, bead board, and the bond lines between the materials used in the construction of the RV walls.

Childers® Chil-Perm® CP-30 Low Odor Vapor Retarder Coating is a highly effective coating designed for low-temperature applications. It has a unique consistency in its wet state, making it suitable for heavy or thin film applications. This coating is formulated with an elastomeric resin, resulting in a tough and flexible dry film with strong adhesive properties.

Advantra® Earthic™ 9443 water-based barrier coating is for paper coaters and packaging makers who want to improve recyclability of paperboard packaging by transitioning from polyethylene to water-based coatings while achieving Total Cost of Ownership (TCO) as similar to polyethylene as possible.

Tuskbond FP14 - 500ml Aerosol is an aerosol applied fluorinated liquid resin that, when dry, resists staining and soiling on fabrics. FP14 acts as a water repellent treatment for furniture, upholstery and carpets. It can be used on a wide range of synthetic and natural fibres and is compatible with most surfaces.

Apollo Roofing RoofPrime Self-Adhered Membrane Primer is a solvent-based self-adhered membrane primer made from synthetic rubber. It is specifically formulated for activating AVCL layers, SA membranes, and torch-on systems. This primer has a fast drying time, which helps minimize project time. It can be easily applied using a brush, roller, or spray method. It is used for improving the adhesion properties of roof decks and treating porous and dusty surfaces, making it suitable for single-ply membrane adhesives.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

UltraShield HY 17 is a premium quality, flexible, hybrid polyurethane-based waterproofing and protective coating ideal for roof, wet, and exposed surface applications. Upon full cure, it forms a tough, resilient, yet flexible coating. UltraShield HY 17 also provides chemical resistance against sulfates, chlorides, bacteria, oil, and common fuels.