Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Product Features
- Creates non-skid sealing on coated floors
- Particularly suitable for fresh food vehicles,meat and fish
- vehicles as well as refrigerated vehicles (tested up to -30 °C)
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating End Applications
- Processing Information
Preparation
- For some substrates the use of mechanical pretreatment and/or cleaner or primer is necessary to achieve good adhesion. Refer to the product properties section of this data sheet for special surface requirements and suitable adhesion promoters.
Processing
- Refer to the technical data table regarding processing parameters. Low temperatures can cause a temporary increase in viscosity resulting in reduced extrusion and slower curing rates.
Cleaning
- Clean tools immediately after use. Once cured, the material can only be removed mechanically. Appropriate cleaners are listed in the product properties table.
Properties
- Component A
Value Units Test Method / Conditions Density 1.7 g/cm³ DIN EN 542 Storage Temperature 10 - 30 °C - Viscosity (at 23°C) 150000 mPa·s Kö-test method 100000 - Physical Properties
Value Units Test Method / Conditions Density 1.5 g/cm³ DIN EN 542 - Component B
Value Units Test Method / Conditions Density 1.1 g/cm³ DIN EN 542 Isocyanate Content 10.5 % - Storage Temperature 10 - 30 °C - Viscosity (at 20°C) 2200 mPa·s Kö-test method 100000 - Processing Properties
Value Units Test Method / Conditions Mixing Ratio (Part A : Part B) 3 : 1 wt % - Open Time 0.5 hours - Pot Life (at 23°C) 120 min Kö-test method 100178 Processing Temperature 20 - 25 °C - Viscosity (at 20°C) 25000 mPa·s Kö-test method 100003
Technical Details & Test Data
- Processing Information
Suitable Substrates Various aluminium alloys
Various steel alloys
Polyurethane (PUR)
Various composite materials (e.g. CFRP, GFRP)
Concrete
Wood
Various other substratesConsistency Pasty Surface Requirements Dry
Clean
Free of grease
Free of dustApplication Method With paint roller - Cleaner for Tools Körasolv® PU
- Moisture Sensitivity The adhesive must not be exposed to moisture before and during application.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
Körapur® 690 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).